Setting up HotSpot or Tethering on Meizu MX6

Sharing the internet connection of Meizu MX6 in wifi is a very convenient feature on the Meizu MX6. In fact, putting the Meizu MX6 in modem mode makes it possible to share the connection of the mobile phone with your entourage or with your other devices. So, in the event you don’t have a suitable Wifi access where you are, we will discover in this post the method to convert the Meizu MX6 into a wifi hotspot. We will initially find out the method to enable and configure connection sharing. We will find out in a second section what is the connection sharing and what it signifies for the Meizu MX6.Tethering-HotSpot-Meizu-MX6

The right way to share the Meizu MX6 connection

To turn your Meizu MX6 into a Wi-Fi hotspot, it’s extremely straightforward. In fact, it is simply necessary to perform 2 steps. The first of all is to enable connection sharing and the second is to configure the network. All you need to do is follow the 2 steps below.

Enable Net Connection Sharing on Meizu MX6

To share your Meizu MX6 internet connection, you will first need to enable connection sharing. To achieve this, go to the Meizu MX6 Settings menu . When you’re there, you have to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three options available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Meizu MX6 is connected to a computer
  • Share by using smartphone bluetooth

If you have made your decision, you just have to test to activate the sharing of the Meizu MX6 connection. When ever it is active, you should find out a small icon show up in the notifications bar.

Configure Wifi connection sharing on Meizu MX6

At this point that you have set your Meizu MX6 in modem mode, you’ll need to set up the network so other devices can connect. Simply those who have chosen Wi-Fi sharing are affected by the setup. To configure, click Through Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can change the password to connect to the Meizu MX6 network. So, enter the security password of your choice and confirm. Finally, you can also change the network name in the event you wish.

Connect to the Meizu MX6 network

At this point that the network is configured, you can connect to it with other devices. To achieve this, you just simply need to bring your device and look for the Meizu MX6 network among the available WIFI networks. If you have found it, you can log in using the password that you configured. And there you have a decent internet connection!

What is Connection Sharing on a Meizu MX6

To make it simple, sharing a connection means sharing the 3G or 4G connection of the Meizu MX6 with other devices. So it’s ideal when you do not have a WiFi connection but you have 3G or 4G network on your Meizu MX6. This permits you to have a good connection almost everywhere. Warning: Note that Meizu MX6’s connection share uses mobile data. This means that the internet usage you are using is deducted from your portable plan. Thus, it’s possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the Meizu MX6 hotspot wifi cuts.