Sharing the internet connection of Logicom Moov in wifi is an extremely practical feature on the Logicom Moov. In fact, putting the Logicom Moov in modem mode afford them the ability to share the connection of the mobile with your entourage or with your different devices. So, if you don’t have a suitable Wifi access where you are, we will see outlined in this article the technique to transform the Logicom Moov into a wifi hotspot. We will 1st discover the technique to enable and configure connection sharing. We will discover in a second section what is the connection sharing and what it implies for the Logicom Moov.
The method to share the Logicom Moov connection
To turn your Logicom Moov into a Wi-Fi hotspot, it’s extremely straightforward. In fact, it’s just required to perform 2 steps. The first is to enable connection sharing and the second is to set up the network. All you need to do is stick to the 2 steps below.
Enable Internet Connection Sharing on Logicom Moov
To share your Logicom Moov net connection, you’ll 1st have to enable connection sharing. To achieve this, go to the Logicom Moov Settings menu . When you’re there, you need to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Logicom Moov is connected to a pc
- Share by using smartphone bluetooth
When you have made your decision, you just have to check to activate the sharing of the Logicom Moov connection. When it is active, you should discover a little icon show up in the notifications bar.
Set up Wifi connection sharing on Logicom Moov
At this point that you’ve set your Logicom Moov in modem mode, you’ll have to set up the network so other devices may connect. Just those who have chosen Wi-Fi sharing are affected by the setup. To set up, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you’re able to change the password to connect to the Logicom Moov network. So, enter the security password which you have chosen and confirm. At last, you’re able to also change the network name if you wish.
Connect to the Logicom Moov network
At this point that the network is configured, you’re able to connect to it with other devices. To achieve this, you just simply have to bring your system and look for the Logicom Moov network among the available WIFI networks. When you have found it, you can sign in using the password that you configured. And there you have a decent net connection!
What is Connection Sharing on a Logicom Moov
To make it basic, sharing a connection means sharing the 3G or 4G connection of the Logicom Moov with other devices. So it is ideal when you do not have a WiFi connection but you have 3G or 4G network on your Logicom Moov. This allows you to have a good connection almost everywhere. Warning: Be aware that Logicom Moov’s connection share uses mobile data. It indicates that the internet usage you are using is deducted from your smartphone plan. Thus, it’s possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Logicom Moov hotspot wifi turn off.
