Sharing the internet connection of Kazam Trooper2 5.0 in wifi is an extremely handy feature on the Kazam Trooper2 5.0. In fact, putting the Kazam Trooper2 5.0 in modem mode makes it possible to share the connection of the phone with your entourage or with your other devices. So, in the event you dont have a suitable Wifi access where you are, we will see in the following paragraphs how to convert the Kazam Trooper2 5.0 into a wifi hotspot. We will first find out how to enable and configure connection sharing. We will find out in a secondary step what is the connection sharing and what it implies for the Kazam Trooper2 5.0.
Tips on how to share the Kazam Trooper2 5.0 connection
To turn your Kazam Trooper2 5.0 into a Wi-Fi hotspot, it’s extremely basic. In fact, it’s only necessary to carry out two steps. The initially is to enable connection sharing and the secondary is to configure the network. All you should do is follow the two steps below.
Enable Internet Connection Sharing on Kazam Trooper2 5.0
To share your Kazam Trooper2 5.0 net connection, you will 1st need to enable connection sharing. To achieve this, go to the Kazam Trooper2 5.0 Settings menu . Once you’re there, you have to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when ever the Kazam Trooper2 5.0 is connected to a laptop
- Share via smartphone bluetooth
If you have made your decision, you just have to test to activate the sharing of the Kazam Trooper2 5.0 connection. When ever it is active, you should find out a little icon show up in the notifications bar.
Configure Wifi connection sharing on Kazam Trooper2 5.0
At this point that you’ve set your Kazam Trooper2 5.0 in modem mode, you’ll need to set up the network so other devices can connect. Simply those who have opted for Wi-Fi sharing are affected by the setup. To configure, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you may change the password to connect to the Kazam Trooper2 5.0 network. So, enter the password of your choice and validate. At last, you may also change the network name in the event you wish.
Connect to the Kazam Trooper2 5.0 network
At this point that the network is configured, you may connect to it with other devices. To achieve this, you simply need to bring your system and look for the Kazam Trooper2 5.0 network among the available WIFI networks. If you have found it, you can sign in using the password that you configured. And there you have a decent net connection!
What is Connection Sharing on a Kazam Trooper2 5.0
To make it basic, sharing a connection means sharing the 3G or 4G connection of the Kazam Trooper2 5.0 with other devices. So it’s ideal when ever you do not have a WiFi connection but you have 3G or 4G network on your Kazam Trooper2 5.0. This enables you to have a drinking connection almost everywhere. Warning: Remember that Kazam Trooper2 5.0’s connection share uses mobile data. It indicates that the internet usage you are using is deducted from your smartphone plan. So, it will be possible to configure a limit on the consumption of mobile data. So, after a certain limit, the Kazam Trooper2 5.0 hotspot wifi turn off.
