Setting up HotSpot or Tethering on CUBE1 G503

Sharing the net connection of CUBE1 G503 in wifi is a very practical feature on the CUBE1 G503. In fact, putting the CUBE1 G503 in modem mode afford them the ability to share the connection of the telephone with your entourage or with your other devices. So, in the event you don’t have a suitable Wifi access where you stand, we will observe in this post the technique to transform the CUBE1 G503 into a wifi hotspot. We will first find out the technique to enable and configure connection sharing. We will find out in a second step what is the connection sharing and what it signifies for the CUBE1 G503.Tethering-HotSpot-CUBE1-G503

How to share the CUBE1 G503 connection

To turn your CUBE1 G503 into a Wi-Fi hotspot, it’s extremely simple. In fact, it is just necessary to perform two steps. The first of all is to enable connection sharing and the second is to configure the network. All you must do is stick to the two steps below.

Enable Net Connection Sharing on CUBE1 G503

To share your CUBE1 G503 net connection, you will first need to enable connection sharing. To accomplish this, go to the CUBE1 G503 Settings menu . Once you’re there, you have to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three options available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when ever the CUBE1 G503 is connected to a pc
  • Share by using telephone bluetooth

When you have made your choice, you just have to test to activate the sharing of the CUBE1 G503 connection. When it is active, you should find out a tiny icon show up in the notifications bar.

Configure Wifi connection sharing on CUBE1 G503

At this point that you have set your CUBE1 G503 in modem mode, you’ll need to set up the network so other devices may connect. Simply those who have opted for Wi-Fi sharing are affected by the setup. To configure, click Through Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you can actually change the password to connect to the CUBE1 G503 network. So, enter the password which you have chosen and validate. Finally, you can actually also modify the network name in the event you wish.

Connect to the CUBE1 G503 network

At this point that the network is configured, you can actually connect to it with other devices. To accomplish this, you simply need to bring your system and look for the CUBE1 G503 network among the available WIFI networks. When you have found it, you can sign in using the password that you designed. And there you have a good net connection!

What is Connection Sharing on a CUBE1 G503

To make it basic, sharing a connection means sharing the 3G or 4G connection of the CUBE1 G503 with other devices. So it is ideal when ever you will not have a WiFi connection but you have 3G or 4G network on your CUBE1 G503. This allows you to have a drinking connection almost everywhere. Warning: Remember that CUBE1 G503’s connection share uses mobile data. It indicates that the net usage you are using is deducted from your portable plan. So, it will be possible to configure a limit on the consumption of mobile data. So, after a specific limit, the CUBE1 G503 hotspot wifi cuts.