Sharing the net connection of Crosscall TREKKER X4 in wifi is an incredibly practical feature on the Crosscall TREKKER X4. In truth, putting the Crosscall TREKKER X4 in modem mode can help you to share the connection of the mobile with your entourage or with your different devices. So, in case you do not have a suitable Wifi access where you stand, we will observe outlined in this article how you can transform the Crosscall TREKKER X4 into a wifi hotspot. We will first see how you can turn on and configure connection sharing. We will see in a second section what is the connection sharing and what it implies for the Crosscall TREKKER X4.
The right way to share the Crosscall TREKKER X4 connection
To turn your Crosscall TREKKER X4 into a Wi-Fi hotspot, it’s very simple. In truth, it’s only necessary to accomplish 2 steps. The first is to enable connection sharing and the second is to set up the network. All you must do is follow the 2 steps below.
Enable Internet Connection Sharing on Crosscall TREKKER X4
To share your Crosscall TREKKER X4 net connection, you will first have to enable connection sharing. To do this, go to the Crosscall TREKKER X4 Settings menu . When you’re there, you must go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when ever the Crosscall TREKKER X4 is connected to a laptop
- Share through phone bluetooth
If you have made your choice, you just have to check to activate the sharing of the Crosscall TREKKER X4 connection. When it is active, you should see a little icon show up in the notifications bar.
Set up Wifi connection sharing on Crosscall TREKKER X4
Now that you have set your Crosscall TREKKER X4 in modem mode, you’ll have to set up the network so other devices may connect. Simply those who have chosen Wi-Fi sharing are affected by the setup. To set up, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can change the password to connect to the Crosscall TREKKER X4 network. So, enter the security password of your choice and confirm. At last, you can also modify the network name in case you wish.
Connect to the Crosscall TREKKER X4 network
Now that the network is configured, you can connect to it with other devices. To do this, you just simply have to bring your system and look for the Crosscall TREKKER X4 network among the available WIFI networks. If you have found it, you can log in using the password that you designed. And there you have a decent net connection!
What is Connection Sharing on a Crosscall TREKKER X4
To make it simple, sharing a connection means sharing the 3G or 4G connection of the Crosscall TREKKER X4 with other devices. So it’s ideal when ever you will not have a WiFi connection but you have 3G or 4G network on your Crosscall TREKKER X4. This allows you to have a good connection almost everywhere. Warning: Realize that Crosscall TREKKER X4’s connection share uses mobile data. This means that the net usage you are using is deducted from your portable plan. So, it will be possible to configure a limit on the consumption of mobile data. So, after a certain limit, the Crosscall TREKKER X4 hotspot wifi turn off.