Sharing the internet connection of Crosscall TREKKER-X2 in wifi is an extremely convenient feature on the Crosscall TREKKER-X2. Indeed, putting the Crosscall TREKKER-X2 in modem mode afford them the ability to share the connection of the telephone with your entourage or with your other devices. So, in the event you dont have a suitable Wifi access where you stand, we will observe on this page the right way to transform the Crosscall TREKKER-X2 into a wifi hotspot. We will first see the right way to enable and configure connection sharing. We will see in a secondary step what is the connection sharing and what it implies for the Crosscall TREKKER-X2.
The technique to share the Crosscall TREKKER-X2 connection
To turn your Crosscall TREKKER-X2 into a Wi-Fi hotspot, it’s very straightforward. Indeed, it is actually only necessary to execute two steps. The 1st is to enable connection sharing and the secondary is to set up the network. All you should do is stick to the two steps below.
Enable Net Connection Sharing on Crosscall TREKKER-X2
To share your Crosscall TREKKER-X2 net connection, you will 1st need to enable connection sharing. To do this, go to the Crosscall TREKKER-X2 Settings menu . Once you’re there, you must go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when ever the Crosscall TREKKER-X2 is connected to a personal pc
- Share by using mobile phone bluetooth
If you have made your choice, you just have to test to activate the sharing of the Crosscall TREKKER-X2 connection. When ever it is active, you should see a little icon show up in the notifications bar.
Configure Wifi connection sharing on Crosscall TREKKER-X2
Now that you have set your Crosscall TREKKER-X2 in modem mode, you’ll need to set up the network so other devices can connect. Just those who have opted for Wi-Fi sharing are affected by the configuration. To set up, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, youre able to change the password to connect to the Crosscall TREKKER-X2 network. So, enter the password of your choice and confirm. At last, youre able to also change the network name in the event you wish.
Connect to the Crosscall TREKKER-X2 network
Now that the network is configured, youre able to connect to it with other devices. To do this, you just simply need to bring your system and look for the Crosscall TREKKER-X2 network among the available WIFI networks. If you have found it, you can sign in using the password that you configured. And there you have a decent net connection!
What is Connection Sharing on a Crosscall TREKKER-X2
To make it basic, sharing a connection means sharing the 3G or 4G connection of the Crosscall TREKKER-X2 with other devices. So it is ideal when ever you do not have a WiFi connection but you have 3G or 4G network on your Crosscall TREKKER-X2. This enables you to have a drinking connection almost everywhere. Warning: Be aware that Crosscall TREKKER-X2’s connection share uses mobile data. This means that the internet usage you are using is deducted from your mobile plan. Thus, it will be possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the Crosscall TREKKER-X2 hotspot wifi turn off.
