Sharing the net connection of Crosscall TREKKER-X1 in wifi is a very convenient feature on the Crosscall TREKKER-X1. Indeed, putting the Crosscall TREKKER-X1 in modem mode can help you to share the connection of the cellphone with your entourage or with your different devices. So, if you dont have a suitable Wifi access where you are, we will discover in this post the right way to convert the Crosscall TREKKER-X1 into a wifi hotspot. We will initially discover the right way to turn on and configure connection sharing. We will discover in a second step what is the connection sharing and what it implies for the Crosscall TREKKER-X1.
How you can share the Crosscall TREKKER-X1 connection
To turn your Crosscall TREKKER-X1 into a Wi-Fi hotspot, it’s very straightforward. Indeed, it’s just required to carry out two steps. The initially is to enable connection sharing and the second is to configure the network. All you must do is stick to the two steps below.
Enable Net Connection Sharing on Crosscall TREKKER-X1
To share your Crosscall TREKKER-X1 net connection, you will 1st have to enable connection sharing. To get this done, go to the Crosscall TREKKER-X1 Settings menu . When you’re there, you have to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Crosscall TREKKER-X1 is connected to a computer
- Share through phone bluetooth
If you have made your choice, you just have to check to activate the sharing of the Crosscall TREKKER-X1 connection. When it is active, you should discover a tiny icon show up in the notifications bar.
Configure Wifi connection sharing on Crosscall TREKKER-X1
Now that you’ve set your Crosscall TREKKER-X1 in modem mode, you’ll have to set up the network so other devices may connect. Only those who have opted for Wi-Fi sharing are affected by the setup. To configure, click Via Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can actually change the password to connect to the Crosscall TREKKER-X1 network. So, enter the security password which you have chosen and confirm. At last, you can actually also modify the network name if you wish.
Connect to the Crosscall TREKKER-X1 network
Now that the network is configured, you can actually connect to it with other devices. To get this done, you simply have to bring your system and look for the Crosscall TREKKER-X1 network among the available WIFI networks. If you have found it, you can log in using the password that you configured. And there you have a good net connection!
What is Connection Sharing on a Crosscall TREKKER-X1
To make it basic, sharing a connection means sharing the 3G or 4G connection of the Crosscall TREKKER-X1 with other devices. So it is ideal when you don’t have a WiFi connection but you have 3G or 4G network on your Crosscall TREKKER-X1. This permits you to have a good connection almost everywhere. Warning: Remember that Crosscall TREKKER-X1’s connection share uses mobile data. This means that the net usage you are using is deducted from your mobile plan. Thus, it is possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the Crosscall TREKKER-X1 hotspot wifi turn off.
