Sharing the net connection of Crosscall TREKKER-S1 in wifi is a very convenient feature on the Crosscall TREKKER-S1. In truth, putting the Crosscall TREKKER-S1 in modem mode afford them the ability to share the connection of the telephone with your entourage or with your different devices. So, in the event you do not have a suitable Wifi access where you stand, we will observe in the following paragraphs how you can convert the Crosscall TREKKER-S1 into a wifi hotspot. We will initially find out how you can enable and configure connection sharing. We will find out in a second section what is the connection sharing and what it signifies for the Crosscall TREKKER-S1.
The method to share the Crosscall TREKKER-S1 connection
To turn your Crosscall TREKKER-S1 into a Wi-Fi hotspot, it’s extremely straightforward. In truth, it can be just necessary to accomplish 2 steps. The first is to enable connection sharing and the second is to configure the network. All you need to do is stick to the 2 steps below.
Enable Internet Connection Sharing on Crosscall TREKKER-S1
To share your Crosscall TREKKER-S1 net connection, you will first need to enable connection sharing. To get this done, go to the Crosscall TREKKER-S1 Settings menu . Once you’re there, you have to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when ever the Crosscall TREKKER-S1 is connected to a pc
- Share via mobile phone bluetooth
When you have made your choice, you just have to test to activate the sharing of the Crosscall TREKKER-S1 connection. When ever it is active, you should find out a little icon appear in the notifications bar.
Set up Wifi connection sharing on Crosscall TREKKER-S1
Now that you have set your Crosscall TREKKER-S1 in modem mode, you’ll need to set up the network so other devices may connect. Just those who have opted for Wi-Fi sharing are affected by the setup. To configure, click Through Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you can change the password to connect to the Crosscall TREKKER-S1 network. So, enter the password which you have chosen and confirm. At last, you can also modify the network name in the event you wish.
Connect to the Crosscall TREKKER-S1 network
Now that the network is configured, you can connect to it with other devices. To get this done, you just simply need to bring your system and look for the Crosscall TREKKER-S1 network among the available WIFI networks. When you have found it, you can sign in using the password that you configured. And there you have a great net connection!
What is Connection Sharing on a Crosscall TREKKER-S1
To make it basic, sharing a connection means sharing the 3G or 4G connection of the Crosscall TREKKER-S1 with other devices. So it’s ideal when ever you will not have a WiFi connection but you have 3G or 4G network on your Crosscall TREKKER-S1. This permits you to have a drinking connection almost everywhere. Warning: Realize that Crosscall TREKKER-S1’s connection share uses mobile data. It indicates that the net usage you are using is deducted from your mobile plan. Thus, it will be possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Crosscall TREKKER-S1 hotspot wifi turn off.
