Setting up HotSpot or Tethering on Blackview P6000

Sharing the internet connection of Blackview P6000 in wifi is a very practical feature on the Blackview P6000. In truth, putting the Blackview P6000 in modem mode can help you to share the connection of the mobile phone with your entourage or with your other devices. So, in case you don’t have a suitable Wifi access where you are, we will see outlined in this article the method to convert the Blackview P6000 into a wifi hotspot. We will 1st see the method to enable and configure connection sharing. We will see in a second section what is the connection sharing and what it signifies for the Blackview P6000.Tethering-HotSpot-Blackview P6000

The method to share the Blackview P6000 connection

To turn your Blackview P6000 into a Wi-Fi hotspot, it’s extremely simple. In truth, it can be just required to carry out two steps. The first of all is to enable connection sharing and the second is to configure the network. All you need to do is follow the two steps below.

Enable Internet Connection Sharing on Blackview P6000

To share your Blackview P6000 net connection, you will 1st need to enable connection sharing. To do this, go to the Blackview P6000 Settings menu . Once you’re there, you must go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have three options available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Blackview P6000 is connected to a pc
  • Share by using smartphone bluetooth

If you have made your decision, you just have to test to activate the sharing of the Blackview P6000 connection. When it is active, you should see a little icon appear in the notifications bar.

Configure Wifi connection sharing on Blackview P6000

At this point that you’ve set your Blackview P6000 in modem mode, you’ll need to set up the network so other devices may connect. Just those who have opted for Wi-Fi sharing are affected by the configuration. To configure, click Via Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you’re able to change the password to connect to the Blackview P6000 network. So, enter the password which you have chosen and validate. Finally, you’re able to also change the network name in case you wish.

Connect to the Blackview P6000 network

At this point that the network is configured, you’re able to connect to it with other devices. To do this, you simply need to bring your system and look for the Blackview P6000 network among the available WIFI networks. If you have found it, you can log in using the password that you configured. And there you have a good net connection!

What is Connection Sharing on a Blackview P6000

To make it simple, sharing a connection means sharing the 3G or 4G connection of the Blackview P6000 with other devices. So it is ideal when you don’t have a WiFi connection but you have 3G or 4G network on your Blackview P6000. This permits you to have a good connection almost everywhere. Warning: Realize that Blackview P6000’s connection share uses mobile data. This implies that the internet usage you are using is deducted from your téléphone plan. So, it is possible to configure a limit on the consumption of mobile data. So, after a certain limit, the Blackview P6000 hotspot wifi turn off.