Sharing the internet connection of ARCHOS Diamond Alpha in wifi is an extremely handy feature on the ARCHOS Diamond Alpha. Certainly, putting the ARCHOS Diamond Alpha in modem mode can help you to share the connection of the telephone with your entourage or with your different devices. So, in the event you do not have a suitable Wifi access where you are, we will see in this article how to convert the ARCHOS Diamond Alpha into a wifi hotspot. We will initially observe how to enable and configure connection sharing. We will observe in a secondary section what is the connection sharing and what it implies for the ARCHOS Diamond Alpha.
The method to share the ARCHOS Diamond Alpha connection
To turn your ARCHOS Diamond Alpha into a Wi-Fi hotspot, it’s very straightforward. Certainly, it’s simply required to execute two steps. The first of all is to enable connection sharing and the secondary is to configure the network. All you have to do is stick to the two steps below.
Enable Internet Connection Sharing on ARCHOS Diamond Alpha
To share your ARCHOS Diamond Alpha net connection, you will first need to enable connection sharing. To get this done, go to the ARCHOS Diamond Alpha Settings menu . When you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when ever the ARCHOS Diamond Alpha is connected to a computer
- Share by using mobile phone bluetooth
When you have made your decision, you just have to test to activate the sharing of the ARCHOS Diamond Alpha connection. When it is active, you should observe a tiny icon show up in the notifications bar.
Configure Wifi connection sharing on ARCHOS Diamond Alpha
Now that you have set your ARCHOS Diamond Alpha in modem mode, you’ll need to set up the network so other devices can connect. Simply those who have chosen Wi-Fi sharing are affected by the setup. To configure, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can actually change the password to connect to the ARCHOS Diamond Alpha network. So, enter the password which you have chosen and confirm. At last, you can actually also modify the network name in the event you wish.
Connect to the ARCHOS Diamond Alpha network
Now that the network is configured, you can actually connect to it with other devices. To get this done, you simply need to bring your device and look for the ARCHOS Diamond Alpha network among the available WIFI networks. When you have found it, you can log in using the password that you configured. And there you have a good net connection!
What is Connection Sharing on a ARCHOS Diamond Alpha
To make it basic, sharing a connection means sharing the 3G or 4G connection of the ARCHOS Diamond Alpha with other devices. So it’s ideal when ever you will not have a WiFi connection but you have 3G or 4G network on your ARCHOS Diamond Alpha. This allows you to have a good connection almost everywhere. Warning: Note that ARCHOS Diamond Alpha’s connection share uses mobile data. This implies that the internet usage you are using is deducted from your téléphone plan. Thus, it will be possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the ARCHOS Diamond Alpha hotspot wifi turn off.