Setting up HotSpot or Tethering on Archos 45c

Sharing the net connection of Archos 45c in wifi is a very handy feature on the Archos 45c. In fact, putting the Archos 45c in modem mode can help you to share the connection of the mobile phone with your entourage or with your different devices. So, if you don’t have a suitable Wifi access where you stand, we will observe in the following paragraphs how to convert the Archos 45c into a wifi hotspot. We will first observe how to enable and configure connection sharing. We will observe in a second section what is the connection sharing and what it implies for the Archos 45c.Tethering-HotSpot-Archos-45c-Platinum

The method to share the Archos 45c connection

To turn your Archos 45c into a Wi-Fi hotspot, it’s incredibly basic. In fact, it is actually only necessary to accomplish 2 steps. The initially is to enable connection sharing and the second is to set up the network. All you have to do is follow the 2 steps below.

Enable Net Connection Sharing on Archos 45c

To share your Archos 45c internet connection, you will 1st have to enable connection sharing. To accomplish this, go to the Archos 45c Settings menu . When you’re there, you need to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three choices available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Archos 45c is connected to a personal pc
  • Share by using cellphone bluetooth

If you have made your decision, you just have to test to activate the sharing of the Archos 45c connection. When ever it is active, you should observe a small icon show up in the notifications bar.

Configure Wifi connection sharing on Archos 45c

At this point that you have set your Archos 45c in modem mode, you’ll have to set up the network so other devices can connect. Only those who have opted for Wi-Fi sharing are affected by the setup. To set up, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you’re able to change the password to connect to the Archos 45c network. So, enter the password which you have chosen and validate. At last, you’re able to also change the network name if you wish.

Connect to the Archos 45c network

At this point that the network is configured, you’re able to connect to it with other devices. To accomplish this, you just simply have to bring your device and look for the Archos 45c network among the available WIFI networks. If you have found it, you can sign in using the password that you configured. And there you have a good internet connection!

What is Connection Sharing on a Archos 45c

To make it basic, sharing a connection means sharing the 3G or 4G connection of the Archos 45c with other devices. So it’s ideal when you will not have a WiFi connection but you have 3G or 4G network on your Archos 45c. This enables you to have a good connection almost everywhere. Warning: Realize that Archos 45c’s connection share uses mobile data. This implies that the net usage you are using is deducted from your mobile plan. Thus, it is possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the Archos 45c hotspot wifi cuts.