Sharing the web connection of Aquaris X5 in wifi is a very handy feature on the Aquaris X5. In fact, putting the Aquaris X5 in modem mode afford them the ability to share the connection of the phone with your entourage or with your other devices. So, in case you dont have a suitable Wifi access where you stand, we will see in the following paragraphs how to convert the Aquaris X5 into a wifi hotspot. We will initially observe how to turn on and configure connection sharing. We will observe in a secondary step what is the connection sharing and what it implies for the Aquaris X5.
The right way to share the Aquaris X5 connection
To turn your Aquaris X5 into a Wi-Fi hotspot, it’s very basic. In fact, it’s simply required to carry out 2 steps. The first is to enable connection sharing and the secondary is to configure the network. All you need to do is follow the 2 steps below.
Enable Net Connection Sharing on Aquaris X5
To share your Aquaris X5 internet connection, you will first need to enable connection sharing. To do this, go to the Aquaris X5 Settings menu . Once you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have three choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Aquaris X5 is connected to a laptop
- Share through telephone bluetooth
When you have made your choice, you just have to test to activate the sharing of the Aquaris X5 connection. When ever it is active, you should observe a little icon show up in the notifications bar.
Configure Wifi connection sharing on Aquaris X5
Now that you’ve set your Aquaris X5 in modem mode, you’ll need to set up the network so other devices may connect. Simply those who have chosen Wi-Fi sharing are affected by the configuration. To configure, click Via Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you can change the password to connect to the Aquaris X5 network. So, enter the password which you have chosen and confirm. Finally, you can also modify the network name in case you wish.
Connect to the Aquaris X5 network
Now that the network is configured, you can connect to it with other devices. To do this, you just simply need to bring your system and look for the Aquaris X5 network among the available WIFI networks. When you have found it, you can sign in using the password that you configured. And there you have a great internet connection!
What is Connection Sharing on a Aquaris X5
To make it simple, sharing a connection means sharing the 3G or 4G connection of the Aquaris X5 with other devices. So it’s ideal when you do not have a WiFi connection but you have 3G or 4G network on your Aquaris X5. This permits you to have a good connection almost everywhere. Warning: Realize that Aquaris X5’s connection share uses mobile data. This implies that the web usage you are using is deducted from your portable plan. So, it will be possible to configure a limit on the consumption of mobile data. So, after a certain limit, the Aquaris X5 hotspot wifi cuts.
