Setting up HotSpot or Tethering on Aquaris A4.5

Sharing the net connection of Aquaris A4.5 in wifi is a very practical feature on the Aquaris A4.5. In truth, putting the Aquaris A4.5 in modem mode can help you to share the connection of the telephone with your entourage or with your different devices. So, in case you don’t have a suitable Wifi access where you stand, we will observe outlined in this article the right way to convert the Aquaris A4.5 into a wifi hotspot. We will 1st find out the right way to turn on and configure connection sharing. We will find out in a secondary step what is the connection sharing and what it implies for the Aquaris A4.5.Tethering-HotSpot-Aquaris-A4.5

The right way to share the Aquaris A4.5 connection

To turn your Aquaris A4.5 into a Wi-Fi hotspot, it’s incredibly simple. In truth, it is actually simply required to accomplish 2 steps. The initially is to enable connection sharing and the secondary is to configure the network. All you must do is stick to the 2 steps below.

Enable Internet Connection Sharing on Aquaris A4.5

To share your Aquaris A4.5 net connection, you will 1st need to enable connection sharing. To get this done, go to the Aquaris A4.5 Settings menu . Once you’re there, you have to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 options available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Aquaris A4.5 is connected to a laptop
  • Share by using smartphone bluetooth

When you have made your choice, you just have to test to activate the sharing of the Aquaris A4.5 connection. When ever it is active, you should find out a tiny icon show up in the notifications bar.

Configure Wifi connection sharing on Aquaris A4.5

At this point that you have set your Aquaris A4.5 in modem mode, you’ll need to set up the network so other devices may connect. Just those who have chosen Wi-Fi sharing are affected by the setup. To configure, click Through Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you can change the password to connect to the Aquaris A4.5 network. So, enter the password which you have chosen and validate. Finally, you can also modify the network name in case you wish.

Connect to the Aquaris A4.5 network

At this point that the network is configured, you can connect to it with other devices. To get this done, you simply need to bring your system and look for the Aquaris A4.5 network among the available WIFI networks. When you have found it, you can log in using the password that you configured. And there you have a decent net connection!

What is Connection Sharing on a Aquaris A4.5

To make it simple, sharing a connection means sharing the 3G or 4G connection of the Aquaris A4.5 with other devices. So it is ideal when you will not have a WiFi connection but you have 3G or 4G network on your Aquaris A4.5. This permits you to have a drinking connection almost everywhere. Warning: Remember that Aquaris A4.5’s connection share uses mobile data. This means that the net usage you are using is deducted from your portable plan. Thus, it is possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Aquaris A4.5 hotspot wifi cuts.