Sharing the net connection of Alcatel One Touch Pop S3 in wifi is an incredibly handy feature on the Alcatel One Touch Pop S3. In truth, putting the Alcatel One Touch Pop S3 in modem mode makes it possible to share the connection of the mobile with your entourage or with your other devices. So, in case you dont have a suitable Wifi access where you are, we will observe outlined in this article the technique to transform the Alcatel One Touch Pop S3 into a wifi hotspot. We will 1st observe the technique to enable and configure connection sharing. We will observe in a secondary section what is the connection sharing and what it signifies for the Alcatel One Touch Pop S3.
How you can share the Alcatel One Touch Pop S3 connection
To turn your Alcatel One Touch Pop S3 into a Wi-Fi hotspot, it’s very basic. In truth, it truly is simply necessary to accomplish 2 steps. The first is to enable connection sharing and the secondary is to set up the network. All you must do is stick to the 2 steps below.
Enable Net Connection Sharing on Alcatel One Touch Pop S3
To share your Alcatel One Touch Pop S3 net connection, you’ll first need to enable connection sharing. To get this done, go to the Alcatel One Touch Pop S3 Settings menu . Once you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have three options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when ever the Alcatel One Touch Pop S3 is connected to a computer
- Share by using cellphone bluetooth
When you have made your choice, you just have to test to activate the sharing of the Alcatel One Touch Pop S3 connection. When it is active, you should observe a tiny icon appear in the notifications bar.
Set up Wifi connection sharing on Alcatel One Touch Pop S3
Now that you’ve set your Alcatel One Touch Pop S3 in modem mode, you’ll need to set up the network so other devices may connect. Only those who have opted for Wi-Fi sharing are affected by the setup. To set up, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you can change the password to connect to the Alcatel One Touch Pop S3 network. So, enter the password which you have chosen and validate. Finally, you can also change the network name in case you wish.
Connect to the Alcatel One Touch Pop S3 network
Now that the network is configured, you can connect to it with other devices. To get this done, you just simply need to bring your device and look for the Alcatel One Touch Pop S3 network among the available WIFI networks. When you have found it, you can log in using the password that you configured. And there you have a decent net connection!
What is Connection Sharing on a Alcatel One Touch Pop S3
To make it basic, sharing a connection means sharing the 3G or 4G connection of the Alcatel One Touch Pop S3 with other devices. So it is ideal when ever you will not have a WiFi connection but you have 3G or 4G network on your Alcatel One Touch Pop S3. This enables you to have a good connection almost everywhere. Warning: Be aware that Alcatel One Touch Pop S3’s connection share uses mobile data. This implies that the net usage you are using is deducted from your téléphone plan. Thus, it’s possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the Alcatel One Touch Pop S3 hotspot wifi turn off.
