Sharing the net connection of ALCATEL 1C in wifi is an extremely practical feature on the ALCATEL 1C. Indeed, putting the ALCATEL 1C in modem mode afford them the ability to share the connection of the cellphone with your entourage or with your other devices. So, in case you dont have a suitable Wifi access where you are, we will discover in this article tips on how to convert the ALCATEL 1C into a wifi hotspot. We will first observe tips on how to enable and configure connection sharing. We will observe in a secondary step what is the connection sharing and what it signifies for the ALCATEL 1C.
Tips on how to share the ALCATEL 1C connection
To turn your ALCATEL 1C into a Wi-Fi hotspot, it’s very simple. Indeed, it is actually simply required to accomplish 2 steps. The first is to enable connection sharing and the secondary is to configure the network. All you must do is stick to the 2 steps below.
Enable Net Connection Sharing on ALCATEL 1C
To share your ALCATEL 1C internet connection, you will 1st have to enable connection sharing. To do this, go to the ALCATEL 1C Settings menu . Once you’re there, you must go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have three choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the ALCATEL 1C is connected to a laptop
- Share via telephone bluetooth
When you have made your decision, you just have to check to activate the sharing of the ALCATEL 1C connection. When it is active, you should observe a little icon appear in the notifications bar.
Configure Wifi connection sharing on ALCATEL 1C
At this point that you have set your ALCATEL 1C in modem mode, you’ll have to set up the network so other devices may connect. Just those who have chosen Wi-Fi sharing are affected by the setup. To configure, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you can change the password to connect to the ALCATEL 1C network. So, enter the security password of your choice and confirm. Finally, you can also change the network name in case you wish.
Connect to the ALCATEL 1C network
At this point that the network is configured, you can connect to it with other devices. To do this, you just have to bring your device and look for the ALCATEL 1C network among the available WIFI networks. When you have found it, you can log in using the password that you designed. And there you have a decent internet connection!
What is Connection Sharing on a ALCATEL 1C
To make it basic, sharing a connection means sharing the 3G or 4G connection of the ALCATEL 1C with other devices. So it’s ideal when you do not have a WiFi connection but you have 3G or 4G network on your ALCATEL 1C. This allows you to have a drinking connection almost everywhere. Warning: Realize that ALCATEL 1C’s connection share uses mobile data. This implies that the net usage you are using is deducted from your mobile plan. Thus, it will be possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the ALCATEL 1C hotspot wifi turn off.
