At times, the Marshall displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This sort of error message can potentially result from many places. So, so that you may connect properly to the Wifi network with your Marshall, we decided to write this guide. So we will observe together what to do and where to look to resolve this issue of Wifi authentication. We will see at 1st what you must do on the Marshall. Finally, we will see what it is actually important to do and check on your Wifi box.
What to do when the Marshall has an authentication problem on the Wifi network
Forget the Wifi network on your Marshall
If perhaps the Wi-Fi network to which you desire to connect has been changed since your last authentication, your Marshall may display the message: Authentication or authentication error . If perhaps the problem comes from there, the solution is very simple. Just forget about the Wifi network in your Marshall. To achieve this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to select the option: Forget this network . Once it’s done, you may try again to connect to the Wifi network. If perhaps the problem is not fixed, go to the next step.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a problem of authentication Wifi on the Marshall because the box is not in Synchronization mode . If you need to activate the synchronization mode of your box, it is actually extremely simple. You should find a synchronization button to press. When ever this is done, a light will normally start blinking. You can actually then try to reconnect to the Wifi network with your Marshall. If perhaps it still does not work, go to the next trick.
Retype Security password
At times the authentication problem comes from the solution you type the Wifi network security password. In truth, it is actually sometimes subtle to type a security password Wifi on its Marshall. We consequently advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in lots of pc problems, the solution is oftentimes extremely simple. In truth, 80% of the pc problems are solved by restarting the machine. We therefore advise you to restart your box and your Marshall. Then try to reconnect with your Marshall.
Check box settings
If perhaps non-e of the prior solutions did work, the problem could be found to be on the box of your provider. It will consequently be important to go in the parameters of the box and to check if perhaps the system of key is in WPA / WPA2 . If perhaps this is not the case, select this option. Then try to connect your Marshall again to Wifi. If perhaps the authentication problem continues, we recommend that you contact your service provider or a telephone store.
