How to open and remove the shell on Wiko Pulp Fab

Opening the Wiko Pulp Fab and removing its hull can be a very practical operation in a great many circumstances. If you need to insert a SIM card or an SD memory card, you might need to remove the cover and open the Wiko Pulp Fab. Opening the Wiko Pulp Fab is also required when you wish to remove the battery or when you desire to dust off the inside of your phone. We will first of all see tips on how to find the point that allows to open the hull of Wiko Pulp Fab. We will find out in a second step the method to open the hull of Wiko Pulp Fab.remove-shell-Wiko-Pulp-Fab-4G

Finding the opening point of Wiko Pulp Fab

If you need to open your Wiko Pulp Fab, the first of all step is to find the opening point of the hull. To do this, we suggest you to refer to the operating instructions of your Wiko Pulp Fab. If you don’t have the user manual of your Wiko Pulp Fab, you may locate it on the net. Most of the time, the method of removing the hull is to slide the hull or to unclip it. Nevertheless, we suggest you to be vigilant when doing this step, in order not to damage your Wiko Pulp Fab. Once you have found the opening point of the hull, you will finally be able to open your Wiko Pulp Fab.

Open the Wiko Pulp Fab

Once you know where the Wiko Pulp Fab opening point is, you will have the capacity to start opening the back part of the hull. To do this slide or boot the rear part of the shell according to the model of your Wiko Pulp Fab. Once it truly is done, half of the hull is removed. This should permit you to access the battery and possibly the SIM card of your Wiko Pulp Fab. If you need to remove the front part of the hull of the smartphone, be aware that it truly is a little more complicated. For this, we suggest you to go in retail store or in specific shop.

The precautions to be taken when opening the Wiko Pulp Fab

You should know that the hull of the Wiko Pulp Fab protects the fragile elements that are inside the telephone. So, in case you consider to open the Wiko Pulp Fab, you will need to handle the smartphone cautiously. Indeed, the elements such as the battery, the printed circuit boards or the SIM card are fragile. Do not allow dust or moisture to get inside the telephone. Install in a clean environment to do this.