Opening the Wiko Lenny 4 and removing its hull might be a very useful operation in many cases. If you want to insert a SIM card or an SD memory card, you may possibly need to remove the cover and open the Wiko Lenny 4. Opening the Wiko Lenny 4 is also necessary when you desire to remove the battery or when you want to dust off the inside of your phone. We will 1st see ways to find the point that allows to open the hull of Wiko Lenny 4. We will find out in a secondary step the technique to open the hull of Wiko Lenny 4.
Finding the opening point of Wiko Lenny 4
If you want to open your Wiko Lenny 4, the 1st step is to find the opening point of the hull. To get this done, we suggest you to refer to the operating instructions of your Wiko Lenny 4. In case you dont have the user manual of your Wiko Lenny 4, you can actually locate it on the internet. Most of the time, the procedure of removing the hull is to slide the hull or to unclip it. Nevertheless, we suggest you to be vigilant when doing this step, in order not to damage your Wiko Lenny 4. After you have found the opening point of the hull, you will at last be capable to open your Wiko Lenny 4.
Open the Wiko Lenny 4
When you know where the Wiko Lenny 4 opening point is, you will be able to start opening the rear part of the hull. To get this done slide or boot the rear part of the shell according to the model of your Wiko Lenny 4. When it can be done, half of the hull is removed. This should assist you to access the battery and probably the SIM card of your Wiko Lenny 4. If you want to remove the front part of the hull of the cellphone, know that it can be a tad bit more complex. For this, we suggest you to go in retail store or in specialized shop.
The safeguards to be taken when opening the Wiko Lenny 4
You should know that the hull of the Wiko Lenny 4 protects the fragile elements that are inside the mobile phone. So, in the event you consider to open the Wiko Lenny 4, you need to handle the cellphone cautiously. Certainly, the elements such as the battery, the printed circuit boards or the SIM card are fragile. Do not allow dust or moisture to get inside the mobile phone. Install in a clean environment to achieve this.
