Opening the Wiko Fever and removing its hull can be an extremely useful procedure in many circumstances. If you wish to insert a SIM card or an SD memory card, you may possibly have to remove the cover and open the Wiko Fever. Opening the Wiko Fever is also required when you need to remove the battery or when ever you need to dust off the inside of your phone. We will initially see how to find the point that allows to open the hull of Wiko Fever. We will find out in a second section the method to open the hull of Wiko Fever.
Finding the opening point of Wiko Fever
If you wish to open your Wiko Fever, the initially step is to find the opening point of the hull. To accomplish this, we suggest you to refer to the operating instructions of your Wiko Fever. In case you do not have the user manual of your Wiko Fever, you can find it on the internet. Many of the time, the method of removing the hull is to slide the hull or to unclip it. Nevertheless, we suggest you to be vigilant when ever doing this step, in order not to affect your Wiko Fever. After you have found the opening point of the hull, you will finally have the capacity to open your Wiko Fever.
Open the Wiko Fever
Once you know where the Wiko Fever opening point is, you will have the capacity to start opening the back part of the hull. To accomplish this slide or boot the rear part of the shell according to the model of your Wiko Fever. Once it truly is done, half of the hull is removed. This should enable you to access the battery and perhaps the SIM card of your Wiko Fever. If you wish to remove the front part of the hull of the smartphone, be aware that it truly is a bit more complex. For this, we suggest you to go in retail store or in specific shop.
The precautions to be taken when ever opening the Wiko Fever
You should know that the hull of the Wiko Fever protects the sensitive elements that are inside the mobile phone. So, in case you decide to open the Wiko Fever, you need to handle the smartphone cautiously. Indeed, the elements such as the battery, the printed circuit boards or the SIM card are sensitive. Do not enable dust or moisture to get inside the mobile phone. Install in a clean environment to get this done.
