Opening the Samsung Wave 3 and removing its hull can be a very practical procedure in several cases. If you wish to insert a SIM card or an SD memory card, you may need to turn off the cover and open the Samsung Wave 3. Opening the Samsung Wave 3 is also required when you wish to remove the battery or when you wish to dust off the inside of your phone. We will initially see how to find the point that allows to open the hull of Samsung Wave 3. We will find out in a second step the right way to open the hull of Samsung Wave 3.
Finding the opening point of Samsung Wave 3
If you wish to open your Samsung Wave 3, the initially step is to find the opening point of the hull. To accomplish this, we suggest you to refer to the operating instructions of your Samsung Wave 3. In the event you dont have the user manual of your Samsung Wave 3, you can actually locate it on the net. Most of the time, the process of removing the hull is to slide the hull or to unclip it. Nevertheless, we suggest you to be vigilant when doing this step, in order not to damage your Samsung Wave 3. When you have found the opening point of the hull, you will at last have the ability to open your Samsung Wave 3.
Open the Samsung Wave 3
When you know where the Samsung Wave 3 opening point is, you will have the capacity to start opening the rear part of the hull. To accomplish this slide or boot the rear part of the shell according to the model of your Samsung Wave 3. When it is done, half of the hull is removed. This should permit you to access the battery and possibly the SIM card of your Samsung Wave 3. If you wish to turn off the front part of the hull of the cellphone, understand that it is a little more complicated. For this, we suggest you to go in retail store or in specific shop.
The safety measures to be taken when opening the Samsung Wave 3
You should know that the hull of the Samsung Wave 3 protects the fragile elements that are inside the phone. So, in case you consider to open the Samsung Wave 3, you must handle the cellphone cautiously. Certainly, the elements such as the battery, the printed circuit boards or the SIM card are fragile. Do not allow dust or moisture to get inside the phone. Install in a clean environment to do this.
