Inserting the SIM card into your Wiko Ridge Fab is necessary if you would like to use your phone. Certainly, the SIM card will allow your Wiko Ridge Fab to be able to connect to the mobile network and therefore to make phone calls. Nonetheless, in the event you just bought your Wiko Ridge Fab, it is actually not always easy to find out ways to put the SIM card. That’s why we made the decision to write this article. We will initially see how to proceed before inserting the SIM card in the Wiko Ridge Fab. We will see ways to insert the SIM card. Finally, we will see what the different types of SIM card.
What to do before putting the SIM into your Wiko Ridge Fab
Before you start inserting the SIM card into your Wiko Ridge Fab, it is actually required to test two or three things. Initially of all, we recommend you to switch off the Wiko Ridge Fab before you put the SIM card. We also advise you to test if the kind of SIM card you have matches to the model of your smartphone. Certainly, there are a lot of types of SIM cards and every smartphone is compatible with a specific type. Refer to the last section of this article for more info. Finally, in the event that the tracking of the SIM card of your Wiko Ridge Fab is on the side, we recommend that you have a pin or a thin and sharp object to open the slot for SIM. If you want to modify the PIN code of the SIM card, please refer to our guideline to modify the PIN code on Wiko Ridge Fab.
The right way to insert the SIM card into the Wiko Ridge Fab
Based on the model of your Wiko Ridge Fab, there are two possible methods for inserting the SIM card. The right technique should therefore be 1 of the following.
Method 1: Insert the SIM card by the side of your Wiko Ridge Fab
To insert the SIM card into your Wiko Ridge Fab, initially find the slot that is generally on the side of the smartphone. It is quite easy to spot it because there is often a little hole next to it. When you have found it, you will have to insert a pointed object into the little hole next to the slot. For example, you can make use of a paper clip to do so. By pushing into the hole, the SIM card rack should come out. You need to after that remove the rack from the slot. Simply insert the SIM card into this rack and re-insert it into your Wiko Ridge Fab. That’s it!
Method 2: Insert the SIM card from the back of the Wiko Ridge Fab
If your Wiko Ridge Fab will not have a slot on the side, this means that the SIM slot is on the back of the smartphone. The initially step will likely be to remove the cache on the back of the Wiko Ridge Fab. To do this, you simply have to unfasten it with your fingertips. Once done, you should see the location of the SIM card. Sometimes the tracking is under the battery. In this case, you should remove the battery. All you have to do is insert the SIM card into your Wiko Ridge Fab. Be careful to put it in the proper direction, the gold side of the card need to be down. Reassemble everything and it’s good!
The different types of SIM cards
There are three different types of SIM cards. Indeed, these three types differ according to their size. We thus find:
- The SIM card: which is of standard size.
- The Micro SIM card: that is smaller than the standard size.
- The Nano SIM card: which is really incredibly little. The chip covers almost the entire surface.
If you do not have the proper SIM card for your Wiko Ridge Fab, you may ask your operator for another 1. There are as well adapters that may resolve compatibility issues. Finally, if you have a standard SIM card, it can be cut to make it into Micro SIM or Nano SIM. At your peril.
