Inserting the SIM card into your Wiko Lenny 2 is important if you need to use your cellphone. Certainly, the SIM card will allow your Wiko Lenny 2 to be able to connect to the mobile network and for that reason to make phone calls. Nevertheless, in the event you just bought your Wiko Lenny 2, it is not always simple to find out how you can set the SIM card. That is why we made the decision to write this article. We will 1st discover how to proceed before inserting the SIM card in the Wiko Lenny 2. We will find out how you can insert the SIM card. Finally, we will see what the diverse types of SIM card.
What to do before putting the SIM into your Wiko Lenny 2
Before you start inserting the SIM card into your Wiko Lenny 2, it is important to check two or 3 stuff. First of all of all, we recommend you to switch off the Wiko Lenny 2 before you set the SIM card. We also recommend you to check if the type of SIM card you have matches to the model of your smartphone. Certainly, there are several types of SIM cards and each phone is compatible with a specific type. Refer to the last part of this article for more information. Finally, in cases where the tracking of the SIM card of your Wiko Lenny 2 is on the side, we advise that you have a pin or a thin and sharp object to open the slot for SIM. If you need to modify the PIN code of the SIM card, please refer to our tuto to modify the PIN code on Wiko Lenny 2.
How to insert the SIM card into the Wiko Lenny 2
Based on the model of your Wiko Lenny 2, there are two possible techniques for inserting the SIM card. The right technique should for that reason be one of the following.
Process 1: Insert the SIM card by the side of your Wiko Lenny 2
To insert the SIM card into your Wiko Lenny 2, 1st find the slot that is normally on the side of the smartphone. It is quite simple to spot it because there is often a tiny hole next to it. If you have found it, you will have to insert a pointed object into the tiny hole next to the slot. For instance, you can use a paper clip to do so. By pushing into the hole, the SIM card rack should come out. You have to then remove the rack from the slot. Simply insert the SIM card into this rack and re-insert it into your Wiko Lenny 2. That is it!
Process 2: Insert the SIM card from the back of the Wiko Lenny 2
If your Wiko Lenny 2 will not have a slot on the side, this means that the SIM slot is on the back of the smartphone. The 1st step are going to be to turn off the cache on the back of the Wiko Lenny 2. To do this, you just simply have to unfasten it with your fingertips. Once carried out, you should see the location of the SIM card. Occasionally the tracking is under the battery. In this case, you should turn off the battery. All you have to do is insert the SIM card into your Wiko Lenny 2. Be careful to put it in the appropriate direction, the gold side of the card must be down. Reassemble everything and it’s good!
The different types of SIM cards
There are three diverse types of SIM cards. Indeed, these 3 types differ according to their size. We thus find:
- The SIM card: which is of standard size.
- The Micro SIM card: that is smaller than the standard size.
- The Nano SIM card: which is really very tiny. The chip covers nearly the entire surface.
In case you do not have the appropriate SIM card for your Wiko Lenny 2, you may ask your operator for a different one. There are additionally adapters that could resolve compatibility issues. Finally, in case you have a standard SIM card, it could be cut to make it into Micro SIM or Nano SIM. At your peril.
