How to insert the SIM card on CUBOT Manito

Inserting the SIM card into your CUBOT Manito is essential if you want to use your phone. In truth, the SIM card enables your CUBOT Manito to be able to connect to the mobile network and consequently to make phone calls. However, if you just bought your CUBOT Manito, it truly is not always simple to find out tips on how to put the SIM card. That’s why we made the decision to write this tuto. We will 1st see how to proceed before inserting the SIM card in the CUBOT Manito. We will discover tips on how to insert the SIM card. Finally, we will find out what the different types of SIM card.insert-sim-card-CUBOT-Manito

What to do before putting the SIM into your CUBOT Manito

Before you start inserting the SIM card into your CUBOT Manito, it truly is required to check 2 or 3 things. 1st of all, we advise you to switch off the CUBOT Manito before you put the SIM card. We also advise you to check if the sort of SIM card you have corresponds to the model of your mobile phone. In truth, there are many types of SIM cards and each smartphone is compatible with a certain type. Refer to the last section of this tuto for more information. At last, in cases where the location of the SIM card of your CUBOT Manito is on the side, we suggest that you have a pin or a thin and sharp object to open the slot for SIM. If you would like to change the PIN code of the SIM card, please refer to our guide to change the PIN code on CUBOT Manito.

How to insert the SIM card into the CUBOT Manito

Determined by the model of your CUBOT Manito, there are two possible methods for inserting the SIM card. The right process should consequently be 1 of the following.

Method 1: Insert the SIM card by the side of your CUBOT Manito

To insert the SIM card into your CUBOT Manito, 1st find the slot that is usually on the side of the mobile phone. It is really simple to spot it because there is often a little hole next to it. If you have found it, you will have to insert a pointed object into the little hole next to the slot. For example, you can use a paper clip to do so. By pushing into the hole, the SIM card rack should come out. You must then remove the rack from the slot. Simply insert the SIM card into this rack and re-insert it into your CUBOT Manito. That’s it!

Method 2: Insert the SIM card from the back of the CUBOT Manito

If your CUBOT Manito will not have a slot on the side, this means that the SIM slot is on the back of the mobile phone. The 1st step are going to be to remove the cache on the back of the CUBOT Manito. To do this, you simply have to unfasten it with your fingertips. Once done, you should find out the location of the SIM card. Occasionally the location is under the battery. In this case, you have to remove the battery. All you have to do is insert the SIM card into your CUBOT Manito. Be careful to put it in the best direction, the gold side of the card need to be down. Reassemble everything and it’s good!

The different types of SIM cards

There are 3 different types of SIM cards. Indeed, these 3 types differ according to their size. We thus find:

  • The SIM card: which is of regular size.
  • The Micro SIM card: that is more compact than the standard size.
  • The Nano SIM card: which is really very little. The chip covers almost the entire surface.

In the event you don’t have the best SIM card for your CUBOT Manito, you’re able to ask your operator for another 1. There are as well adapters that can resolve compatibility issues. At last, if you have a standard SIM card, it may be cut to make it into Micro SIM or Nano SIM. At your peril.