Inserting the SIM card into your CUBOT Cheetah 2 is necessary if you want to use your cellphone. In fact, the SIM card permits your CUBOT Cheetah 2 to be able to connect to the mobile network and therefore to make phone calls. Nonetheless, in case you just bought your CUBOT Cheetah 2, it is actually not always easy to find out how you can set the SIM card. That is why we decided to write this content. We will first of all discover what to do before inserting the SIM card in the CUBOT Cheetah 2. We will discover how you can insert the SIM card. Finally, we will find out what the different types of SIM card.
What to do before putting the SIM into your CUBOT Cheetah 2
Before you start inserting the SIM card into your CUBOT Cheetah 2, it is actually required to check two or 3 stuff. 1st of all, we suggest you to switch off the CUBOT Cheetah 2 before you set the SIM card. We also recommend you to check if the type of SIM card you have matches to the model of your smartphone. In fact, there are several types of SIM cards and each mobile phone is compatible with a specific type. Refer to the last part of this content for more info. Finally, whenever the location of the SIM card of your CUBOT Cheetah 2 is on the side, we advise that you have a pin or a thin and sharp object to open the slot for SIM. If you would like to change the PIN code of the SIM card, please refer to our guide to change the PIN code on CUBOT Cheetah 2.
How to insert the SIM card into the CUBOT Cheetah 2
According to the model of your CUBOT Cheetah 2, there are two likely solutions for inserting the SIM card. The right process should therefore be 1 of the following.
Method 1: Insert the SIM card by the side of your CUBOT Cheetah 2
To insert the SIM card into your CUBOT Cheetah 2, first of all find the slot that is usually on the side of the smartphone. It is rather easy to spot it because there is often a small hole next to it. When you have found it, you will have to insert a pointed object into the small hole next to the slot. For instance, you can use a paper clip to do so. By pushing into the hole, the SIM card rack should come out. You will need to after that remove the rack from the slot. Simply insert the SIM card into this rack and re-insert it into your CUBOT Cheetah 2. That is it!
Method 2: Insert the SIM card from the back of the CUBOT Cheetah 2
If your CUBOT Cheetah 2 does not have a slot on the side, this means that the SIM slot is on the back of the smartphone. The first of all step will likely be to turn off the cache on the back of the CUBOT Cheetah 2. To do this, you simply have to unfasten it with your fingertips. Once done, you should find out the location of the SIM card. At times the location is under the battery. In this case, you will need to turn off the battery. All you have to do is insert the SIM card into your CUBOT Cheetah 2. Be careful to put it in the right direction, the gold side of the card must be down. Reassemble everything and it’s good!
The different types of SIM cards
There are 3 different types of SIM cards. Indeed, these 3 types differ according to their size. We so find:
- The SIM card: which is of standard size.
- The Micro SIM card: that is smaller than the standard size.
- The Nano SIM card: which is really extremely small. The chip covers almost the entire surface.
If you do not have the right SIM card for your CUBOT Cheetah 2, you can actually ask your operator for another 1. There are additionally adapters which could solve compatibility issues. Finally, when you have a standard SIM card, it can be cut to make it into Micro SIM or Nano SIM. At your peril.
