Occasionally the display screen of ZTE Nubia My Prague stays black. This trouble may appear in a lot of situations. Sometimes it occurs after the ZTE Nubia My Prague falls. Other times, the screen stays black after a start, lock, or sleep. In any case, don’t worry, you will find many tips to repair the black screen of your ZTE Nubia My Prague. For that, it’s going to be essential to verify several stuff prior to trying the different methods. We will discover at primary what things to check when the screen of ZTE Nubia My Prague remains black. We will discover in a second time all the tricks to unlock this horrible black display screen.
What should you watch if you have a black screen on ZTE Nubia My Prague
Before embarking on the techniques, we recommend you to verify the points below to be able to better understand where the issue can originate. This will give you good clues of the nature of the issue.
Is the ZTE Nubia My Prague LED on when the display screen remains black?
One of the first of all stuff to verify is the tiny led that is on the top of your display screen. In the event that the LED is red or blue when the ZTE Nubia My Prague display screen remains black, it signifies that the mobile phone is switched on. In such a case, it is highly likely that the issue comes from the display screen.
Is the ZTE Nubia My Prague charged?
From time to time, a deep battery discharge prevents the ZTE Nubia My Prague from turning on for a time. Make sure the ZTE Nubia My Prague is totally recharged by leaving it connected for at least one hour. If perhaps after this the LED doesn’t light up and the display screen stays black, the issue can potentially result from the battery.
Is the ZTE Nubia My Prague damaged?
If the ZTE Nubia My Prague display screen remains black after shock, after falling , after being wet , or after damage , the screen can be harmed. In such a case, none of the tricks listed below will perform. You will then have to bring your ZTE Nubia My Prague to a repairshop.
How to proceed when the ZTE Nubia My Prague screen stays black?
After checking out that the issue comes from the display screen, you can actually try the next tips to unlock the black display screen of your ZTE Nubia My Prague. If a technique doesn’t perform, look at the following one.
Plug the ZTE Nubia My Prague into its charger
The very 1st thing to do when the display screen of ZTE Nubia My Prague remains black is to put the telephone on. This will make it possible to be serene for any subsequent manipulations. This likewise resolves the possible issue of a deep discharge of the telephone battery.
If you can, remove the battery from the ZTE Nubia My Prague
If the ZTE Nubia My Prague is easily removable, we recommend you to remove the battery . This from time to time solves the black display screen issue. Hang on a couple of secs, then turn the battery back on and try to start the telephone. If perhaps the display screen is still blocked, look at the following step.
Remove SIM card and SD card
It from time to time occurs, without justification, that the SIM card or the SD card conflicts with ZTE Nubia My Prague and triggers a black display screen. One of the tricks to try is to remove the SIM card and the SD card. Once it’s done, you must try to start the mobile phone. If perhaps it works, it implies there is a conflict with the SIM or SD card.
Force ZTE Nubia My Prague to restart
If the display screen stays black, the issue often solves with a forced restart . To get this done, you need to press several keys simultaneously. You have to stay at least 10 secs for the forced restart to work. The key combo depends upon the models but had to be one of the subsequent:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Hang on until the battery is empty
At last, in cases where none of the previously mentioned procédures work, you can actually try to let your battery discharge. Be sure the battery is totally empty. Once it is performed, plug your ZTE Nubia My Prague into its power adaptor and try to start the ZTE Nubia My Prague.
