How to fix ZTE Blade A310 black screen

In some cases the display screen of ZTE Blade A310 remains black. This issue may happen in several situations. Sometimes it occurs after the ZTE Blade A310 falls. Other times, the screen remains black after a start, lock, or sleep. No matter the reason, don’t be anxious, you will find several tricks to repair the black screen of your ZTE Blade A310. For that, it will be needed to verify several stuff just before attempting the diverse solutions. We will see at primary what things to check when the screen of ZTE Blade A310 remains black. We will see in a second time all the tricks in order to unlock this horrible black display screen.black-screen-ZTE-Blade-A310

What should you watch in case you have a black screen on ZTE Blade A310

Before embarking on the techniques, we recommend you to verify the points below to be able to better understand where the issue can form. This will provide you good indications of the nature of the issue.

Is the ZTE Blade A310 LED on when the display screen remains black?

One of the first of all stuff to verify is the tiny led that is on top of your display screen. If the LED is red or blue when the ZTE Blade A310 display screen remains black, this means that the mobile is turned on. In such a case, it is extremely likely that the issue comes from the display screen.

Is the ZTE Blade A310 charged?

Sometimes, a deep battery discharge prevents the ZTE Blade A310 from turning on for quite a while. Make sure the ZTE Blade A310 is fully recharged by leaving it connected for at least 1 hour. If perhaps after that the LED does not light up and the display screen remains black, the issue can probably originate from the electric battery.

Is the ZTE Blade A310 damaged?

If the ZTE Blade A310 display screen remains black after shock, after dropping , after being wet , or after cracking , the screen could possibly be damaged. In such a case, not one of the methods below will work. You will then have to bring your ZTE Blade A310 to a repairman.

How to proceed when the ZTE Blade A310 screen remains black?

After examining that the issue comes from the display screen, you can actually try the following ideas to unlock the black display screen of your ZTE Blade A310. If a technique does not work, check out the next one.

Plug the ZTE Blade A310 into its charger

One thing to accomplish when the display screen of ZTE Blade A310 remains black is to put the phone on. This will make it feasible to be serene for any subsequent manipulations. This as well resolves the possible issue of a deep discharge of the phone electric battery.

If you can, remove the electric battery from the ZTE Blade A310

If the ZTE Blade A310 is easily detachable, we recommend you to remove the electric battery . This sometimes solves the black display screen issue. Hold out a couple of seconds, then turn the battery back on and make an attempt to start the phone. In cases where the display screen is still blocked, check out the next step.

Remove SIM card and SD card

It sometimes happens, without explanation, that the SIM card or the SD card conflicts with ZTE Blade A310 and triggers a black display screen. One of the methods to try is to remove the SIM card and the SD card. When it’s carried out, you must try to start the telephone. In cases where it works, this means there is a conflict with the SIM or SD card.

Force ZTE Blade A310 to reboot

If the display screen remains black, the issue often solves with a forced reboot . To do this, you will have to press several keys simultaneously. You will need to remain at least 10 seconds for the forced reboot to work. The key combination depends upon the versions but had to be 1 of the subsequent:

  • low volume + power button
  • low volume + power button + cough Home
  • high volume + power button
  • volume top + touch power + cough Home
  • touch power + cough Home

Hang on until the electric battery is empty

At last, in cases where not one of the above méthodes function, you can actually try to let your electric battery discharge. Be sure the electric battery is entirely empty. When it is finished, plug your ZTE Blade A310 into its power adaptor and try to start the ZTE Blade A310.