In some cases the screen of Wiko Slide stays black. This issue can occur in many circumstances. Oftentimes it occurs after the Wiko Slide falls. Other times, the screen stays black after a start, lock, or sleep. In any case, don’t worry, you will discover many tips to repair the black screen of your Wiko Slide. For that, it’ll be necessary to check several points just before trying the different solutions. We will find out at primary what things to verify when the screen of Wiko Slide remains black. We will find out in a second time all the tricks to be able to unlock this nasty black screen.
What should you watch in case you have a black screen on Wiko Slide
Before embarking on the techniques, we advise you to check the points below in order to better understand where the problem can originate. This will provide you good indications of the nature of the problem.
Is the Wiko Slide LED on when the screen remains black?
One of the first points to check is the little led that is at the top of your screen. In cases where the LED is red or blue when the Wiko Slide screen remains black, it indicates that the phone is turned on. In this instance, it is highly likely that the problem comes from the screen.
Is the Wiko Slide charged?
Sometimes, a deep battery discharge prevents the Wiko Slide from turning on for quite a while. Make sure the Wiko Slide is fully recharged by leaving it connected for at least 1 hour. In the event that after this the LED does not light up and the screen stays black, the problem can probably originate from the battery.
Is the Wiko Slide damaged?
If the Wiko Slide screen remains black after shock, after dropping , after being wet , or after damage , the screen might be harmed. In this instance, not one of the tips below will perform. You will then have to bring your Wiko Slide to a repairman.
How to proceed when the Wiko Slide screen stays black?
After verifying that the problem emanates from the screen, you can actually try the next ideas to unlock the black screen of your Wiko Slide. If a method does not perform, check out the following one.
Plug the Wiko Slide into its charger
The first thing to accomplish when the screen of Wiko Slide remains black is to put the phone on. This will make it possible to be peaceful for any subsequent manipulations. This additionally resolves the possible problem of a deep discharge of the phone battery.
Whenever possible, take out the battery from the Wiko Slide
If the Wiko Slide is easily removable, we advise you to remove the battery . This sometimes solves the black screen problem. Hang on some secs, then turn the battery back on and make an attempt to start the phone. In the event that the screen is still blocked, check out the following step.
Remove SIM card and SD card
It sometimes happens, without explanation, that the SIM card or the SD card conflicts with Wiko Slide and triggers a black screen. One of the tips to try is to take out the SIM card and the SD card. Once it’s completed, you must try to start the mobile phone. In the event that it works, it signifies there is a conflict with the SIM or SD card.
Force Wiko Slide to reboot
If the screen stays black, the problem often resolves with a forced reboot . To accomplish this, you must press several keys simultaneously. You need to stay at least TEN secs for the forced reboot to work. The key combo will depend on the versions but had to be 1 of the subsequent:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Hang on until the battery is empty
At last, in cases where not one of the previously mentioned solutions do the job, you can actually try to let your battery discharge. Ensure that the battery is totally empty. Once it’s performed, plug your Wiko Slide into its power adaptor and try to start the Wiko Slide.
