Sometimes the screen of Wiko ROBBY stays black. This trouble may occur in many situations. Often it occurs after the Wiko ROBBY falls. Other times, the screen stays black after a start, lock, or sleep. Whatever the case, do not worry, you will find many techniques to resolve the black screen of your Wiko ROBBY. For that, it’s going to be required to verify several things before trying the diverse methods. We will see at primary what things to check when the screen of Wiko ROBBY remains black. We will see in a second time all the tricks to unlock this bad black screen.
What should you watch if you have a black screen on Wiko ROBBY
Before embarking on the tricks, we suggest you to verify the things below to be able to better understand where the issue can originate. This will give you good clues of the nature of the issue.
Is the Wiko ROBBY LED on when the screen remains black?
One of the 1st things to verify is the small led that is on top of your screen. If the LED is red or blue when the Wiko ROBBY screen remains black, it indicates that the phone is turned on. In this instance, it is extremely likely that the issue comes from the screen.
Is the Wiko ROBBY charged?
Sometimes, a deep battery discharge prevents the Wiko ROBBY from turning on for some time. Make sure the Wiko ROBBY is totally recharged by leaving it connected for at least 1 hour. If perhaps after this the LED does not illuminate and the screen stays black, the issue can potentially originate from the battery.
Is the Wiko ROBBY damaged?
If the Wiko ROBBY screen remains black after shock, after falling , after being wet , or after cracking , the screen may be broken. In this instance, not one of the tips listed below will do the job. You will then have to bring your Wiko ROBBY to a repairshop.
What to do when the Wiko ROBBY screen stays black?
After verifying that the issue originates from the screen, you can actually try the next ideas to unlock the black screen of your Wiko ROBBY. If a trick does not do the job, look at the next one.
Plug the Wiko ROBBY into its charger
The very 1st thing to accomplish when the screen of Wiko ROBBY remains black is to put the telephone on. This makes it possible to be serene for all subsequent manipulations. This likewise solves the possible issue of a deep discharge of the telephone battery.
If it is possible, take out the battery from the Wiko ROBBY
If the Wiko ROBBY is easily removable, we suggest you to remove the battery . This from time to time handles the black screen issue. Wait a couple of secs, then turn the battery back on and make an attempt to start the telephone. In the event that the screen is still blocked, look at the next step.
Remove SIM card and SD card
It from time to time happens, without explanation, that the SIM card or the SD card conflicts with Wiko ROBBY and triggers a black screen. One of the tips to try is to take out the SIM card and the SD card. When it’s finished, it is advisable to try to start the mobile phone. In the event that it works, it indicates there is a conflict with the SIM or SD card.
Force Wiko ROBBY to reboot
If the screen stays black, the issue often resolves with a forced reboot . To achieve this, you need to press several keys at the same time. You need to stay at least 10 secs for the forced reboot to run. The key combo will depend on the models but had to be 1 of the subsequent:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Wait until the battery is empty
Finally, in the event that not one of the above procédures function, you can actually try to let your battery discharge. Be sure the battery is completely empty. When it is finished, plug your Wiko ROBBY into its power adaptor and try to start the Wiko ROBBY.
