How to fix Wiko Ridge Fab black screen

In some cases the screen of Wiko Ridge Fab stays black. This problem may occur in a lot of circumstances. Occasionally it happens after the Wiko Ridge Fab falls. Other times, the screen stays black after a start, lock, or sleep. In any case, don’t be anxious, you will discover several tips to resolve the black screen of your Wiko Ridge Fab. For that, it will probably be needed to examine several things prior to attempting the different solutions. We will find out at initially what things to verify when the screen of Wiko Ridge Fab remains black. We will find out in a second time all the tricks in order to unlock this nasty black screen.black-screen-Wiko-Ridge-Fab-4G

What should you watch when you have a black screen on Wiko Ridge Fab

Before embarking on the tricks, we recommend you to examine the points below to be able to better understand where the trouble can originate. This will deliver you good indications of the nature of the trouble.

Is the Wiko Ridge Fab LED on when the screen remains black?

One of the first things to examine is the little led that is on top of your screen. In the event that the LED is red or blue when the Wiko Ridge Fab screen remains black, it means that the mobile is switched on. In such cases, it is highly probably that the trouble originates from the screen.

Is the Wiko Ridge Fab charged?

Occasionally, a deep battery discharge prevents the Wiko Ridge Fab from turning on for quite a while. Make sure the Wiko Ridge Fab is entirely charged by leaving it connected for at least one hour. If perhaps after that the LED does not illuminate and the screen stays black, the trouble can potentially originate from the electric battery.

Is the Wiko Ridge Fab damaged?

If the Wiko Ridge Fab screen remains black after shock, after dropping , after being wet , or after breaking , the screen might be broken. In such cases, none of the tips listed below will work. You will then have to bring your Wiko Ridge Fab to a repairshop.

How to proceed when the Wiko Ridge Fab screen stays black?

After checking out that the trouble emanates from the screen, you can try the following tips to unlock the black screen of your Wiko Ridge Fab. If a trick does not work, check out the following one.

Plug the Wiko Ridge Fab into its charger

The very 1st thing to accomplish when the screen of Wiko Ridge Fab remains black is to put the cellphone on. This will make it possible to be peaceful for any following manipulations. This as well handles the possible trouble of a deep discharge of the cellphone electric battery.

When possible, take out the electric battery from the Wiko Ridge Fab

If the Wiko Ridge Fab is easily detachable, we recommend you to remove the electric battery . This occasionally handles the black screen trouble. Hang on a couple of secs, then turn the battery back on and try to start the cellphone. In cases where the screen is still blocked, check out the following step.

Remove SIM card and SD card

It occasionally happens, without explanation, that the SIM card or the SD card conflicts with Wiko Ridge Fab and triggers a black screen. One of the tips to try is to take out the SIM card and the SD card. Once it’s completed, it is advisable to try to start the mobile phone. In cases where it works, it signifies there is a conflict with the SIM or SD card.

Force Wiko Ridge Fab to restart

If the screen stays black, the trouble often resolves with a forced restart . To get this done, you must press a number of keys at the same time. You need to remain at least 10 secs for the forced restart to work. The key combination depends on the versions but had to be one of the following:

  • low volume + power button
  • low volume + power button + cough Home
  • high volume + power button
  • volume top + touch power + cough Home
  • touch power + cough Home

Wait until the electric battery is empty

Finally, in the event that none of the above procédures do the job, you can try to let your electric battery discharge. Make certain the electric battery is totally empty. Once it’s performed, plug your Wiko Ridge Fab into its power adaptor and try to start the Wiko Ridge Fab.