At times the Wiko Pulp Fab overheats and is warm when ever touched. Do not get worried, this doesn’t signify that your Wiko Pulp Fab has a trouble. In truth, it can be quite prevalent that a smartphone overheats and this may originate from a lot of things. So, there are many reasons and elements that may induce the Wiko Pulp Fab to overheat. We will observe on this page what are the reasons for this increase in temperature and how to remedy it. We will first observe what the sources of overheating may be. We will observe in a secondary part how to stop the overheating of Wiko Pulp Fab. At last, we will see what applications you can actually install to regulate the temperature of the smartphone.
Why does the Wiko Pulp Fab overheat?
There may be a lot of factors for the overheating of Wiko Pulp Fab. You can find below all the possible reasons for an overheating:
- The cpu is too busy: An app or applications could be too hungry and the cpu may overheat.
- Wiko Pulp Fab overheats while charging: In the event you do not use the original charging cable, the smartphone may overheat.
- The battery overheats: At times the old battery overheats. If it is the case, it’s a signal that you have to change it.
- The ambient temperature: In case it is very hot around you, it’s possible that the Wiko Pulp Fab has problems to cool. Occasionally it gets hot.
- You are asking for too much power: It is possible that the Wiko Pulp Fab will overheat when you have been playing energy-hungry games for a while or if you are exercising an activity that needs a large amount of power. As an example: film in HD for several minutes.
If your Wiko Pulp Fab restarts or turns off when it overheats, it’s normal. In truth, it is a security procedure that turns off the system to ensure the temperature doesn’t damage the smartphone.
Tips on how to stop the Wiko Pulp Fab from overheating
Depending on the origin of the overheating on Wiko Pulp Fab, the solutions will likely be different. Here are the solutions according to the problems.
- Whenever the cpu is too busy: You can actually close the applications that are open on the Wiko Pulp Fab one at a time and observe if the smartphone cools down.
- If the Wiko Pulp Fab overheats while charging: Use the initial charging cable in case you have it. If you no longer own it, try using another cable.
- If the battery overheats: Install an app that could control the temperature of the Wiko Pulp Fab battery. If it remains, change the battery before it explodes.
- Whenever the ambient temperature is way too high: Close the applications and keep your Wiko Pulp Fab faraway from the sun for the time it is cooled.
- In cases where you ask an excessive amount of power: Take breaks in your games or activities.
Install an app to control the temperature of your Wiko Pulp Fab
To learn more on the origin of the overheating of your Wiko Pulp Fab and to know its internal temperature, there are applications. These applications allow, among other stuff, to be able to established maximum temperature thresholds. They also display the Wiko Pulp Fab’s processor activity and the temperature of the battery. We recommend the Coolify application which is very easy to use. However, your Wiko Pulp Fab need to be rooted to use.
