In some cases the screen of Wiko Jimmy stays black. This issue can occur in a lot of situations. Occasionally it happens after the Wiko Jimmy falls. Other times, the screen stays black after a start, lock, or sleep. No matter the reason, do not worry, there are several techniques to repair the black screen of your Wiko Jimmy. For that, it will be recommended to verify several stuff before trying the diverse methods. We will discover at first what things to examine when the screen of Wiko Jimmy remains black. We will discover in a second time all the tricks to be able to unlock this bad black screen.
What should you watch if you have a black screen on Wiko Jimmy
Before embarking on the techniques, we advise you to verify the things below to be able to better understand where the issue can originate. This will give you good clues of the nature of the issue.
Is the Wiko Jimmy LED on when the screen remains black?
One of the 1st stuff to verify is the tiny led that is on the top of your screen. If the LED is red or blue when the Wiko Jimmy screen remains black, it indicates that the mobile phone is started. In this case, it is very likely that the issue comes from the screen.
Is the Wiko Jimmy charged?
Occasionally, a deep battery discharge prevents the Wiko Jimmy from turning on for a while. Be sure the Wiko Jimmy is fully charged by leaving it connected for at least 1 hour. If perhaps after that the LED doesn’t light and the screen stays black, the issue can possibly come from the electric battery.
Is the Wiko Jimmy damaged?
If the Wiko Jimmy screen remains black after shock, after dropping , after being wet , or after damage , the screen may be broken. In this case, not one of the techniques listed below will perform. You will then have to bring your Wiko Jimmy to a repairshop.
How to proceed when ever the Wiko Jimmy screen stays black?
After looking at that the issue originates from the screen, you can actually try the next recommendations to unlock the black screen of your Wiko Jimmy. If a trick doesn’t perform, look at the following one.
Plug the Wiko Jimmy into its charger
The very first thing to accomplish when the screen of Wiko Jimmy remains black is to put the telephone on. This makes it feasible to be peaceful for all subsequent manipulations. This likewise solves the possible issue of a deep discharge of the telephone electric battery.
Whenever possible, take out the electric battery from the Wiko Jimmy
If the Wiko Jimmy is easily detachable, we advise you to remove the electric battery . This from time to time handles the black screen issue. Hang on a couple of secs, then turn the battery back on and try to start the telephone. If the screen is still blocked, look at the following step.
Remove SIM card and SD card
It from time to time happens, without justification, that the SIM card or the SD card conflicts with Wiko Jimmy and triggers a black screen. 1 of the techniques to try is to take out the SIM card and the SD card. Once it’s finished, you should try to start the cellphone. If it works, it means there is a conflict with the SIM or SD card.
Force Wiko Jimmy to reboot
If the screen stays black, the issue often solves with a forced reboot . To get this done, you have got to press a number of keys at the same time. You must stay at least 10 secs for the forced reboot to work. The key combo will depend on the models but had to be 1 of the following:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Hang on until the electric battery is empty
Finally, in cases where not one of the above procédures do the job, you can actually try to let your electric battery discharge. Ensure that the electric battery is totally empty. Once it is performed, plug your Wiko Jimmy into its power adaptor and try to start the Wiko Jimmy.
