From time to time the screen of Wiko JERRY 2 remains black. This issue can appear in several circumstances. Often it occurs after the Wiko JERRY 2 falls. Other times, the screen remains black after a start, lock, or sleep. No matter the reason, don’t worry, you will discover several methods to fix the black screen of your Wiko JERRY 2. For that, it’s going to be important to verify several stuff before trying the diverse techniques. We will find out at first what things to check when the screen of Wiko JERRY 2 remains black. We will find out in a second time all the tricks in order to unlock this unpleasant black screen.
What should you watch when you have a black screen on Wiko JERRY 2
Before embarking on the techniques, we suggest you to verify the things below to be able to better understand where the problem can form. This will give you good clues of the nature of the problem.
Is the Wiko JERRY 2 LED on when the screen remains black?
One of the 1st stuff to verify is the small led that is at the top of your screen. In cases where the LED is red or blue when the Wiko JERRY 2 screen remains black, it means that the telephone is turned on. In this case, it is extremely likely that the problem originates from the screen.
Is the Wiko JERRY 2 charged?
Sometimes, a deep battery discharge prevents the Wiko JERRY 2 from turning on for some time. Ensure the Wiko JERRY 2 is entirely charged by leaving it connected for at least 1 hour. If perhaps after that the LED does not light and the screen remains black, the problem can probably originate from the battery.
Is the Wiko JERRY 2 damaged?
If the Wiko JERRY 2 screen remains black after shock, after falling , after being wet , or after breaking , the screen may well be harmed. In this case, none of the tips listed below will do the job. You will then have to bring your Wiko JERRY 2 to a repairshop.
What you can do when ever the Wiko JERRY 2 screen remains black?
After verifying that the problem comes from the screen, you can try the next ideas to unlock the black screen of your Wiko JERRY 2. If a technique does not do the job, check out the following one.
Plug the Wiko JERRY 2 into its charger
One thing to perform when the screen of Wiko JERRY 2 remains black is to put the cellphone on. This makes it possible to be peaceful for all following manipulations. This also handles the possible problem of a deep discharge of the cellphone battery.
When possible, take out the battery from the Wiko JERRY 2
If the Wiko JERRY 2 is easily detachable, we suggest you to remove the battery . This occasionally solves the black screen problem. Wait a few secs, then turn the battery back on and make an attempt to start the cellphone. If the screen is still blocked, check out the following step.
Remove SIM card and SD card
It occasionally happens, without justification, that the SIM card or the SD card conflicts with Wiko JERRY 2 and causes a black screen. 1 of the tips to try is to take out the SIM card and the SD card. When it’s completed, you must try to start the telephone. If it works, it implies there is a conflict with the SIM or SD card.
Force Wiko JERRY 2 to reboot
If the screen remains black, the problem often solves with a forced reboot . To do this, you must press several keys at the same time. You must stay at least 10 secs for the forced reboot to run. The key combo depends upon the versions but had to be 1 of the following:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Hang on until the battery is empty
At last, if perhaps none of the above solutions do the job, you can try to let your battery discharge. Be sure the battery is entirely empty. When it’s finished, plug your Wiko JERRY 2 into its charger and try to start the Wiko JERRY 2.
