Occasionally the screen of Wiko Highway Signs remains black. This issue can happen in several situations. Occasionally it occurs after the Wiko Highway Signs falls. Other times, the screen remains black after a start, lock, or sleep. Whatever the case, do not worry, you will find many methods to repair the black screen of your Wiko Highway Signs. For that, it will be necessary to check several stuff just before trying the different solutions. We will discover at initially what things to verify when the screen of Wiko Highway Signs remains black. We will discover in a second time all the tricks in order to unlock this awful black screen.
What should you check out if you have a black screen on Wiko Highway Signs
Before embarking on the tricks, we suggest you to check the things below to be able to better understand where the problem can originate. This will give you good indications of the nature of the problem.
Is the Wiko Highway Signs LED on when the screen remains black?
One of the 1st stuff to check is the small led that is on top of your screen. If perhaps the LED is red or blue when the Wiko Highway Signs screen remains black, it means that the phone is switched on. In such a case, it is very probably that the problem originates from the screen.
Is the Wiko Highway Signs charged?
From time to time, a deep battery discharge prevents the Wiko Highway Signs from turning on for a while. Be sure the Wiko Highway Signs is fully charged by leaving it connected for at least 1 hour. If after this the LED does not light up and the screen remains black, the problem can probably come from the electric battery.
Is the Wiko Highway Signs damaged?
If the Wiko Highway Signs screen remains black after shock, after dropping , after being wet , or after damage , the screen could be broken. In such a case, not one of the methods listed below will do the job. You will then have to bring your Wiko Highway Signs to a repairshop.
What you can do when the Wiko Highway Signs screen remains black?
After looking at that the problem comes from the screen, you can try the next ideas to unlock the black screen of your Wiko Highway Signs. If a technique does not do the job, look at the following one.
Plug the Wiko Highway Signs into its charger
The 1st thing to accomplish when the screen of Wiko Highway Signs remains black is to put the mobile on. This will make it feasible to be peaceful for any following manipulations. This likewise handles the possible problem of a deep discharge of the mobile electric battery.
When possible, remove the electric battery from the Wiko Highway Signs
If the Wiko Highway Signs is easily removable, we suggest you to remove the electric battery . This occasionally handles the black screen problem. Wait a few seconds, then turn the battery back on and try to start the mobile. In cases where the screen is still blocked, look at the following step.
Remove SIM card and SD card
It occasionally occurs, without explanation, that the SIM card or the SD card conflicts with Wiko Highway Signs and causes a black screen. One of the methods to try is to remove the SIM card and the SD card. When it’s carried out, you must try to start the telephone. In cases where it works, it means there is a conflict with the SIM or SD card.
Force Wiko Highway Signs to reboot
If the screen remains black, the problem often solves with a forced reboot . To do this, you will need to press a number of keys at the same time. You have to stay at least TEN seconds for the forced reboot to run. The key combo is determined by the versions but had to be 1 of the following:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Hang on until the electric battery is empty
At last, in the event that not one of the above méthodes work, you can try to let your electric battery discharge. Ensure that the electric battery is totally empty. When it’s finished, plug your Wiko Highway Signs into its charger and try to start the Wiko Highway Signs.
