How to fix Wiko Cink Peax 2 black screen

In some cases the display screen of Wiko Cink Peax 2 stays black. This issue can occur in a lot of situations. Often it happens after the Wiko Cink Peax 2 falls. Other times, the screen stays black after a start, lock, or sleep. No matter the reason, do not worry, there are several tips to repair the black screen of your Wiko Cink Peax 2. For that, it will be required to verify several points prior to attempting the different methods. We will find out at initially what things to examine when the screen of Wiko Cink Peax 2 remains black. We will find out in a second time all the tricks in order to unlock this unpleasant black display screen.black-screen-Wiko-Cink-Peax-2

What should you watch in case you have a black screen on Wiko Cink Peax 2

Before embarking on the tricks, we suggest you to verify the points below in order to better understand where the trouble can originate. This will give you good clues of the nature of the trouble.

Is the Wiko Cink Peax 2 LED on when the display screen remains black?

One of the 1st points to verify is the tiny led that is on top of your display screen. If perhaps the LED is red or blue when the Wiko Cink Peax 2 display screen remains black, this means that the mobile is switched on. In cases like this, it is highly probably that the trouble originates from the display screen.

Is the Wiko Cink Peax 2 charged?

From time to time, a deep battery discharge prevents the Wiko Cink Peax 2 from turning on for a while. Ensure that the Wiko Cink Peax 2 is entirely recharged by leaving it connected for at least 1 hour. If perhaps after that the LED does not illuminate and the display screen stays black, the trouble can potentially result from the battery.

Is the Wiko Cink Peax 2 damaged?

If the Wiko Cink Peax 2 display screen remains black after shock, after dropping , after being wet , or after damage , the screen may perhaps be damaged. In cases like this, none of the techniques below will perform. You will then have to bring your Wiko Cink Peax 2 to a repairman.

What to do when the Wiko Cink Peax 2 screen stays black?

After looking at that the trouble emanates from the display screen, you can try the following tips to unlock the black display screen of your Wiko Cink Peax 2. If a technique does not perform, look at the next one.

Plug the Wiko Cink Peax 2 into its charger

The very first thing to perform when the display screen of Wiko Cink Peax 2 remains black is to put the phone on. This makes it possible to be peaceful for all subsequent manipulations. This likewise handles the possible trouble of a deep discharge of the phone battery.

If you can, remove the battery from the Wiko Cink Peax 2

If the Wiko Cink Peax 2 is easily removable, we suggest you to remove the battery . This from time to time handles the black display screen trouble. Wait some secs, then turn the battery back on and try to start the phone. If perhaps the display screen is still blocked, look at the next step.

Remove SIM card and SD card

It from time to time happens, without reason, that the SIM card or the SD card conflicts with Wiko Cink Peax 2 and triggers a black display screen. 1 of the techniques to try is to remove the SIM card and the SD card. Once it’s finished, you should try to start the telephone. If perhaps it works, it means there is a conflict with the SIM or SD card.

Force Wiko Cink Peax 2 to restart

If the display screen stays black, the trouble often solves with a forced restart . To do this, you will need to press several keys simultaneously. You need to stay at least TEN secs for the forced restart to run. The key combination depends upon the versions but had to be 1 of the following:

  • low volume + power button
  • low volume + power button + cough Home
  • high volume + power button
  • volume top + touch power + cough Home
  • touch power + cough Home

Hang on until the battery is empty

Finally, in the event that none of the above solutions do the job, you can try to let your battery discharge. Make certain the battery is completely empty. Once it’s performed, plug your Wiko Cink Peax 2 into its power adaptor and try to start the Wiko Cink Peax 2.