From time to time the screen of Wiko Cink+ stays black. This problem may happen in many situations. Sometimes it happens after the Wiko Cink+ falls. Other times, the screen stays black after a start, lock, or sleep. In any case, don’t be anxious, you will find many techniques to repair the black screen of your Wiko Cink+. For that, it will probably be required to check several things before trying the diverse methods. We will see at primary what things to verify when the screen of Wiko Cink+ remains black. We will see in a second time all the tricks to be able to unlock this nasty black screen.
What should you watch in case you have a black screen on Wiko Cink+
Before embarking on the tricks, we recommend you to check the points below to be able to better understand where the issue can originate. This will deliver you good clues of the nature of the issue.
Is the Wiko Cink+ LED on when the screen remains black?
One of the first of all things to check is the small led that is on the top of your screen. In cases where the LED is red or blue when the Wiko Cink+ screen remains black, it means that the cellphone is switched on. In such a case, it is highly likely that the issue comes from the screen.
Is the Wiko Cink+ charged?
Occasionally, a deep battery discharge prevents the Wiko Cink+ from turning on for a while. Ensure the Wiko Cink+ is entirely charged by leaving it connected for at least one hour. If after that the LED does not light up and the screen stays black, the issue can probably come from the electric battery.
Is the Wiko Cink+ damaged?
If the Wiko Cink+ screen remains black after shock, after falling , after being wet , or after cracking , the screen may perhaps be harmed. In such a case, probably none of the methods listed below will work. You will then have to bring your Wiko Cink+ to a repairshop.
What you can do when the Wiko Cink+ screen stays black?
After checking out that the issue comes from the screen, you can try the next ideas to unlock the black screen of your Wiko Cink+. If a trick does not work, go to the next one.
Plug the Wiko Cink+ into its charger
One thing to accomplish when the screen of Wiko Cink+ remains black is to put the cellphone on. This will make it possible to be serene for all following manipulations. This additionally handles the possible issue of a deep discharge of the cellphone electric battery.
If it is possible, take out the electric battery from the Wiko Cink+
If the Wiko Cink+ is easily detachable, we recommend you to remove the electric battery . This from time to time solves the black screen issue. Hold out a couple of secs, then turn the battery back on and make an attempt to start the cellphone. In the event that the screen is still blocked, go to the next step.
Remove SIM card and SD card
It from time to time happens, without reason, that the SIM card or the SD card conflicts with Wiko Cink+ and causes a black screen. 1 of the methods to try is to take out the SIM card and the SD card. When it’s carried out, you should try to start the cellphone. In the event that it works, this means there is a conflict with the SIM or SD card.
Force Wiko Cink+ to reboot
If the screen stays black, the issue often resolves with a forced reboot . To achieve this, you will have to press several keys simultaneously. You will need to stay at least 10 secs for the forced reboot to run. The key combination will depend on the versions but had to be one of the subsequent:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Wait until the electric battery is empty
At last, if perhaps none of the previously mentioned procédures do the job, you can try to let your electric battery discharge. Ensure that the electric battery is totally empty. When it’s performed, plug your Wiko Cink+ into its phone chrgr and try to start the Wiko Cink+.
