How to fix Samsung Rex 70 black screen

Sometimes the display screen of Samsung Rex 70 stays black. This situation can happen in many situations. Often it occurs after the Samsung Rex 70 falls. Other times, the screen stays black after a start, lock, or sleep. No matter the reason, don’t worry, you will discover several techniques to resolve the black screen of your Samsung Rex 70. For that, it’ll be recommended to check several points prior to attempting the diverse techniques. We will discover at initially what things to verify when the screen of Samsung Rex 70 remains black. We will discover in a second time all the tricks in order to unlock this unpleasant black display screen.black-screen-Samsung-Rex-70

What should you watch if you have a black screen on Samsung Rex 70

Before embarking on the techniques, we advise you to check the things below to be able to better understand where the problem can originate. This will provide you good clues of the nature of the problem.

Is the Samsung Rex 70 LED on when the display screen remains black?

One of the 1st points to check is the tiny led that is at the top of your display screen. In the event that the LED is red or blue when the Samsung Rex 70 display screen remains black, this means that the mobile phone is turned on. In such cases, it is very probably that the problem originates from the display screen.

Is the Samsung Rex 70 charged?

From time to time, a deep battery discharge prevents the Samsung Rex 70 from turning on for a while. Be sure the Samsung Rex 70 is totally recharged by leaving it connected for at least 1 hour. If perhaps after this the LED does not illuminate and the display screen stays black, the problem can potentially result from the battery.

Is the Samsung Rex 70 damaged?

If the Samsung Rex 70 display screen remains black after shock, after dropping , after being wet , or after cracking , the screen can be broken. In such cases, none of the tips listed below will perform. You will then have to bring your Samsung Rex 70 to a repairman.

How to proceed when the Samsung Rex 70 screen stays black?

After verifying that the problem originates from the display screen, you can actually try the following recommendations to unlock the black display screen of your Samsung Rex 70. If a trick does not perform, go to the next one.

Plug the Samsung Rex 70 into its charger

The very first thing to perform when the display screen of Samsung Rex 70 remains black is to put the telephone on. This will make it feasible to be peaceful for any following manipulations. This as well solves the possible problem of a deep discharge of the telephone battery.

If you can, take out the battery from the Samsung Rex 70

If the Samsung Rex 70 is easily removable, we advise you to remove the battery . This from time to time solves the black display screen problem. Hang on a few seconds, then turn the battery back on and try to start the telephone. If perhaps the display screen is still blocked, go to the next step.

Remove SIM card and SD card

It from time to time occurs, without explanation, that the SIM card or the SD card conflicts with Samsung Rex 70 and causes a black display screen. One of the tips to try is to take out the SIM card and the SD card. When it’s done, you must try to start the phone. If perhaps it works, this means there is a conflict with the SIM or SD card.

Force Samsung Rex 70 to restart

If the display screen stays black, the problem often solves with a forced restart . To do this, you must press a number of keys simultaneously. You need to remain at least 10 seconds for the forced restart to work. The key combo depends upon the versions but had to be 1 of the following:

  • low volume + power button
  • low volume + power button + cough Home
  • high volume + power button
  • volume top + touch power + cough Home
  • touch power + cough Home

Hang on until the battery is empty

Finally, in cases where none of the previously mentioned procédures work, you can actually try to let your battery discharge. Make sure the battery is totally empty. When it is completed, plug your Samsung Rex 70 into its power adaptor and try to start the Samsung Rex 70.