From time to time the screen of Huawei Ascend Y300 stays black. This issue can occur in a lot of situations. Often it occurs after the Huawei Ascend Y300 falls. Other times, the screen stays black after a start, lock, or sleep. In any case, don’t worry, there are several tricks to repair the black screen of your Huawei Ascend Y300. For that, it’s going to be required to verify several things prior to trying the different solutions. We will find out at primary what things to check when the screen of Huawei Ascend Y300 remains black. We will find out in a second time all the tricks in order to unlock this horrible black screen.
What should you check out in case you have a black screen on Huawei Ascend Y300
Before embarking on the techniques, we recommend you to verify the points below to be able to better understand where the problem can originate. This will provide you good clues of the nature of the problem.
Is the Huawei Ascend Y300 LED on when the screen remains black?
One of the first things to verify is the little led that is at the top of your screen. If the LED is red or blue when the Huawei Ascend Y300 screen remains black, it indicates that the mobile is turned on. In cases like this, it is extremely likely that the problem originates from the screen.
Is the Huawei Ascend Y300 charged?
Sometimes, a deep battery discharge prevents the Huawei Ascend Y300 from turning on for quite a while. Make certain the Huawei Ascend Y300 is completely charged by leaving it connected for at least 1 hour. In the event that after that the LED does not light and the screen stays black, the problem can probably result from the electric battery.
Is the Huawei Ascend Y300 damaged?
If the Huawei Ascend Y300 screen remains black after shock, after dropping , after being wet , or after cracking , the screen might be damaged. In cases like this, not one of the tips below will perform. You will then have to bring your Huawei Ascend Y300 to a repairshop.
What to do when the Huawei Ascend Y300 screen stays black?
After examining that the problem originates from the screen, you can try the following ideas to unlock the black screen of your Huawei Ascend Y300. If a trick does not perform, go to the next one.
Plug the Huawei Ascend Y300 into its charger
The very 1st thing to do when the screen of Huawei Ascend Y300 remains black is to put the mobile on. This will make it feasible to be peaceful for all following manipulations. This also solves the possible problem of a deep discharge of the mobile electric battery.
Whenever possible, remove the electric battery from the Huawei Ascend Y300
If the Huawei Ascend Y300 is easily detachable, we recommend you to remove the electric battery . This sometimes handles the black screen problem. Hang on a few secs, then turn the battery back on and try to start the mobile. In cases where the screen is still blocked, go to the next step.
Remove SIM card and SD card
It sometimes happens, without reason, that the SIM card or the SD card conflicts with Huawei Ascend Y300 and triggers a black screen. One of the tips to try is to remove the SIM card and the SD card. Once it’s done, you must try to start the cellphone. In cases where it works, it signifies there is a conflict with the SIM or SD card.
Force Huawei Ascend Y300 to restart
If the screen stays black, the problem often solves with a forced restart . To achieve this, you have got to press several keys simultaneously. You need to stay at least TEN secs for the forced restart to run. The key combination will depend on the models but had to be 1 of the following:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Wait until the electric battery is empty
Finally, if perhaps none of the previously mentioned méthodes perform, you can try to let your electric battery discharge. Ensure the electric battery is entirely empty. Once it is done, plug your Huawei Ascend Y300 into its charger and try to start the Huawei Ascend Y300.
