Occasionally the screen of Crosscall TREKKER X4 stays black. This situation may appear in several circumstances. Often it happens after the Crosscall TREKKER X4 falls. Other times, the screen stays black after a start, lock, or sleep. Whatever the case, do not worry, you will find several tips to fix the black screen of your Crosscall TREKKER X4. For that, it will probably be recommended to examine several stuff just before attempting the different techniques. We will discover at first what things to verify when the screen of Crosscall TREKKER X4 remains black. We will discover in a second time all the tricks in order to unlock this horrible black screen.
What should you watch if you have a black screen on Crosscall TREKKER X4
Before embarking on the tricks, we recommend you to examine the points below in order to better understand where the trouble can originate. This will give you good clues of the nature of the trouble.
Is the Crosscall TREKKER X4 LED on when the screen remains black?
One of the 1st stuff to examine is the small led that is on top of your screen. In cases where the LED is red or blue when the Crosscall TREKKER X4 screen remains black, this means that the telephone is switched on. In this case, it is very likely that the trouble originates from the screen.
Is the Crosscall TREKKER X4 charged?
Sometimes, a deep battery discharge prevents the Crosscall TREKKER X4 from turning on for a while. Ensure the Crosscall TREKKER X4 is fully charged by leaving it connected for at least one hour. In the event that after this the LED doesn’t illuminate and the screen stays black, the trouble can possibly originate from the electric battery.
Is the Crosscall TREKKER X4 damaged?
If the Crosscall TREKKER X4 screen remains black after shock, after dropping , after being wet , or after breaking , the screen could possibly be broken. In this case, not one of the tricks listed below will do the job. You will then have to bring your Crosscall TREKKER X4 to a repairman.
How to proceed when ever the Crosscall TREKKER X4 screen stays black?
After verifying that the trouble emanates from the screen, you can actually try the following recommendations to unlock the black screen of your Crosscall TREKKER X4. If a technique doesn’t do the job, look at the following one.
Plug the Crosscall TREKKER X4 into its charger
One thing to do when the screen of Crosscall TREKKER X4 remains black is to put the mobile on. This makes it possible to be peaceful for all subsequent manipulations. This additionally resolves the possible trouble of a deep discharge of the mobile electric battery.
If you can, take away the electric battery from the Crosscall TREKKER X4
If the Crosscall TREKKER X4 is easily detachable, we recommend you to remove the electric battery . This sometimes handles the black screen trouble. Wait a couple of seconds, then turn the battery back on and try to start the mobile. If the screen is still blocked, look at the following step.
Remove SIM card and SD card
It sometimes happens, without explanation, that the SIM card or the SD card conflicts with Crosscall TREKKER X4 and triggers a black screen. One of the tricks to try is to take away the SIM card and the SD card. When it’s completed, you ought to try to start the mobile phone. If it works, it means there is a conflict with the SIM or SD card.
Force Crosscall TREKKER X4 to restart
If the screen stays black, the trouble often resolves with a forced restart . To accomplish this, you have got to press a number of keys at the same time. You need to remain at least TEN seconds for the forced restart to run. The key combo will depend on the versions but had to be one of the subsequent:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Hang on until the electric battery is empty
At last, in the event that none of the previously mentioned solutions perform, you can actually try to let your electric battery discharge. Ensure that the electric battery is totally empty. When it is finished, plug your Crosscall TREKKER X4 into its charger and try to start the Crosscall TREKKER X4.
