How to fix Crosscall TREKKER-X1 black screen

Occasionally the screen of Crosscall TREKKER-X1 stays black. This situation may happen in several situations. Oftentimes it occurs after the Crosscall TREKKER-X1 falls. Other times, the screen stays black after a start, lock, or sleep. No matter the reason, do not worry, you will find many tricks to repair the black screen of your Crosscall TREKKER-X1. For that, it’s going to be essential to verify several points just before trying the different techniques. We will discover at initially what things to verify when the screen of Crosscall TREKKER-X1 remains black. We will discover in a second time all the tricks to be able to unlock this horrible black screen.black-screen-Crosscall-TREKKER-X1

What should you check out in case you have a black screen on Crosscall TREKKER-X1

Before embarking on the tricks, we recommend you to verify the points below to be able to better understand where the problem can form. This will provide you good clues of the nature of the problem.

Is the Crosscall TREKKER-X1 LED on when the screen remains black?

One of the first of all points to verify is the little led that is at the top of your screen. If the LED is red or blue when the Crosscall TREKKER-X1 screen remains black, this means that the telephone is switched on. In this instance, it is highly likely that the problem comes from the screen.

Is the Crosscall TREKKER-X1 charged?

From time to time, a deep battery discharge prevents the Crosscall TREKKER-X1 from turning on for a while. Ensure that the Crosscall TREKKER-X1 is completely recharged by leaving it connected for at least one hour. In the event that after that the LED doesn’t illuminate and the screen stays black, the problem can probably originate from the battery.

Is the Crosscall TREKKER-X1 damaged?

If the Crosscall TREKKER-X1 screen remains black after shock, after dropping , after being wet , or after damage , the screen could be harmed. In this instance, not one of the methods below will work. You will then have to bring your Crosscall TREKKER-X1 to a repairman.

How to proceed when the Crosscall TREKKER-X1 screen stays black?

After looking at that the problem originates from the screen, you can actually try the following recommendations to unlock the black screen of your Crosscall TREKKER-X1. If a method doesn’t work, go to the next one.

Plug the Crosscall TREKKER-X1 into its charger

The first thing to accomplish when the screen of Crosscall TREKKER-X1 remains black is to put the mobile on. This will make it possible to be peaceful for any following manipulations. This likewise resolves the possible problem of a deep discharge of the mobile battery.

If it is possible, take out the battery from the Crosscall TREKKER-X1

If the Crosscall TREKKER-X1 is easily removable, we recommend you to remove the battery . This occasionally solves the black screen problem. Wait a couple of secs, then turn the battery back on and make an attempt to start the mobile. If perhaps the screen is still blocked, go to the next step.

Remove SIM card and SD card

It occasionally happens, without reason, that the SIM card or the SD card conflicts with Crosscall TREKKER-X1 and triggers a black screen. One of the methods to try is to take out the SIM card and the SD card. When it’s done, you must try to start the mobile phone. If perhaps it works, it signifies there is a conflict with the SIM or SD card.

Force Crosscall TREKKER-X1 to restart

If the screen stays black, the problem often resolves with a forced restart . To accomplish this, you have got to press a number of keys at the same time. You will need to remain at least 10 secs for the forced restart to work. The key combo depends on the versions but had to be one of the subsequent:

  • low volume + power button
  • low volume + power button + cough Home
  • high volume + power button
  • volume top + touch power + cough Home
  • touch power + cough Home

Hang on until the battery is empty

Finally, if perhaps none of the previously mentioned solutions perform, you can actually try to let your battery discharge. Make certain the battery is totally empty. When it’s performed, plug your Crosscall TREKKER-X1 into its charger and try to start the Crosscall TREKKER-X1.