How to fix Crosscall TREKKER-S1 black screen

Occasionally the display screen of Crosscall TREKKER-S1 remains black. This situation can appear in a lot of situations. Oftentimes it occurs after the Crosscall TREKKER-S1 falls. Other times, the screen remains black after a start, lock, or sleep. No matter the reason, don’t be anxious, you will find many tricks to resolve the black screen of your Crosscall TREKKER-S1. For that, it’ll be important to check several things just before attempting the diverse methods. We will discover at first what things to check when the screen of Crosscall TREKKER-S1 remains black. We will discover in a second time all the tricks in order to unlock this bad black display screen.black-screen-Crosscall-TREKKER-S1

What should you check out when you have a black screen on Crosscall TREKKER-S1

Before embarking on the tricks, we advise you to check the things below to be able to better understand where the problem can originate. This will deliver you good indications of the nature of the problem.

Is the Crosscall TREKKER-S1 LED on when the display screen remains black?

One of the first of all things to check is the little led that is on the top of your display screen. If perhaps the LED is red or blue when the Crosscall TREKKER-S1 display screen remains black, it means that the cellphone is switched on. In this instance, it is very probably that the problem originates from the display screen.

Is the Crosscall TREKKER-S1 charged?

Sometimes, a deep battery discharge prevents the Crosscall TREKKER-S1 from turning on for some time. Be sure the Crosscall TREKKER-S1 is totally recharged by leaving it connected for at least one hour. In the event that after that the LED doesn’t illuminate and the display screen remains black, the problem can potentially result from the battery.

Is the Crosscall TREKKER-S1 damaged?

If the Crosscall TREKKER-S1 display screen remains black after shock, after falling , after being wet , or after breaking , the screen may well be harmed. In this instance, probably none of the tips listed below will work. You will then have to bring your Crosscall TREKKER-S1 to a repairman.

How to proceed when the Crosscall TREKKER-S1 screen remains black?

After examining that the problem emanates from the display screen, you can try the following ideas to unlock the black display screen of your Crosscall TREKKER-S1. If a trick doesn’t work, look at the next one.

Plug the Crosscall TREKKER-S1 into its charger

The 1st thing to perform when the display screen of Crosscall TREKKER-S1 remains black is to put the mobile on. This makes it feasible to be serene for any subsequent manipulations. This additionally handles the possible problem of a deep discharge of the mobile battery.

When possible, take away the battery from the Crosscall TREKKER-S1

If the Crosscall TREKKER-S1 is easily removable, we advise you to remove the battery . This from time to time solves the black display screen problem. Wait a few secs, then turn the battery back on and make an attempt to start the mobile. In cases where the display screen is still blocked, look at the next step.

Remove SIM card and SD card

It from time to time happens, without reason, that the SIM card or the SD card conflicts with Crosscall TREKKER-S1 and causes a black display screen. One of the tips to try is to take away the SIM card and the SD card. When it’s performed, you must try to start the phone. In cases where it works, it implies there is a conflict with the SIM or SD card.

Force Crosscall TREKKER-S1 to reboot

If the display screen remains black, the problem often solves with a forced reboot . To achieve this, you will have to press several keys simultaneously. You will need to remain at least 10 secs for the forced reboot to run. The key combination depends on the models but had to be one of the subsequent:

  • low volume + power button
  • low volume + power button + cough Home
  • high volume + power button
  • volume top + touch power + cough Home
  • touch power + cough Home

Wait until the battery is empty

At last, if none of the previously mentioned méthodes perform, you can try to let your battery discharge. Be sure the battery is entirely empty. When it is completed, plug your Crosscall TREKKER-S1 into its power adaptor and try to start the Crosscall TREKKER-S1.