How to fix Crosscall TREKKER-M1 black screen

From time to time the screen of Crosscall TREKKER-M1 stays black. This situation can happen in several situations. Often it happens after the Crosscall TREKKER-M1 falls. Other times, the screen stays black after a start, lock, or sleep. Whatever the case, don’t worry, you will discover several techniques to resolve the black screen of your Crosscall TREKKER-M1. For that, it will probably be needed to examine several things before attempting the diverse methods. We will find out at initially what things to examine when the screen of Crosscall TREKKER-M1 remains black. We will find out in a second time all the tricks to unlock this horrible black screen.black-screen-Crosscall-TREKKER-M1

What should you check out when you have a black screen on Crosscall TREKKER-M1

Before embarking on the tricks, we advise you to examine the points below to be able to better understand where the trouble can originate. This will provide you good clues of the nature of the trouble.

Is the Crosscall TREKKER-M1 LED on when the screen remains black?

One of the first of all things to examine is the small led that is on the top of your screen. If perhaps the LED is red or blue when the Crosscall TREKKER-M1 screen remains black, it indicates that the telephone is turned on. In this instance, it is highly likely that the trouble originates from the screen.

Is the Crosscall TREKKER-M1 charged?

From time to time, a deep battery discharge prevents the Crosscall TREKKER-M1 from turning on for quite a while. Be sure the Crosscall TREKKER-M1 is totally charged by leaving it connected for at least 1 hour. In the event that after that the LED does not illuminate and the screen stays black, the trouble can possibly originate from the battery.

Is the Crosscall TREKKER-M1 damaged?

If the Crosscall TREKKER-M1 screen remains black after shock, after dropping , after being wet , or after cracking , the screen can be damaged. In this instance, not one of the tricks listed below will perform. You will then have to bring your Crosscall TREKKER-M1 to a repairman.

What you can do when the Crosscall TREKKER-M1 screen stays black?

After examining that the trouble comes from the screen, you can actually try the next ideas to unlock the black screen of your Crosscall TREKKER-M1. If a technique does not perform, look at the following one.

Plug the Crosscall TREKKER-M1 into its charger

One thing to do when the screen of Crosscall TREKKER-M1 remains black is to put the phone on. This makes it feasible to be peaceful for any following manipulations. This as well solves the possible trouble of a deep discharge of the phone battery.

If you can, remove the battery from the Crosscall TREKKER-M1

If the Crosscall TREKKER-M1 is easily detachable, we advise you to remove the battery . This sometimes handles the black screen trouble. Hang on a few seconds, then turn the battery back on and make an attempt to start the phone. In cases where the screen is still blocked, look at the following step.

Remove SIM card and SD card

It sometimes happens, without justification, that the SIM card or the SD card conflicts with Crosscall TREKKER-M1 and triggers a black screen. 1 of the tricks to try is to remove the SIM card and the SD card. When it’s performed, you ought to try to start the mobile phone. In cases where it works, this means there is a conflict with the SIM or SD card.

Force Crosscall TREKKER-M1 to restart

If the screen stays black, the trouble often solves with a forced restart . To get this done, you have got to press a number of keys simultaneously. You need to stay at least TEN seconds for the forced restart to run. The key combination depends on the models but had to be 1 of the subsequent:

  • low volume + power button
  • low volume + power button + cough Home
  • high volume + power button
  • volume top + touch power + cough Home
  • touch power + cough Home

Wait until the battery is empty

Finally, in the event that not one of the above procédures function, you can actually try to let your battery discharge. Be sure the battery is totally empty. When it’s performed, plug your Crosscall TREKKER-M1 into its power adaptor and try to start the Crosscall TREKKER-M1.