In some cases the display screen of Condor Plume P8 pro stays black. This issue can occur in a lot of situations. Often it happens after the Condor Plume P8 pro falls. Other times, the screen stays black after a start, lock, or sleep. In any case, do not worry, you will discover many techniques to repair the black screen of your Condor Plume P8 pro. For that, it will probably be needed to verify several things before attempting the diverse techniques. We will see at first what things to verify when the screen of Condor Plume P8 pro remains black. We will see in a second time all the tricks to be able to unlock this bad black display screen.
What should you check out if you have a black screen on Condor Plume P8 pro
Before embarking on the tricks, we recommend you to verify the things below in order to better understand where the problem can originate. This will provide you good indications of the nature of the problem.
Is the Condor Plume P8 pro LED on when the display screen remains black?
One of the first things to verify is the small led that is at the top of your display screen. If the LED is red or blue when the Condor Plume P8 pro display screen remains black, it signifies that the cellphone is started. In cases like this, it is extremely likely that the problem originates from the display screen.
Is the Condor Plume P8 pro charged?
Occasionally, a deep battery discharge prevents the Condor Plume P8 pro from turning on for a time. Make sure the Condor Plume P8 pro is completely charged by leaving it connected for at least 1 hour. If after this the LED does not light up and the display screen stays black, the problem can possibly originate from the electric battery.
Is the Condor Plume P8 pro damaged?
If the Condor Plume P8 pro display screen remains black after shock, after falling , after being wet , or after damage , the screen could possibly be broken. In cases like this, none of the tips below will perform. You will then have to bring your Condor Plume P8 pro to a repairshop.
What to do when ever the Condor Plume P8 pro screen stays black?
After checking that the problem originates from the display screen, you can actually try the next ideas to unlock the black display screen of your Condor Plume P8 pro. If a technique does not perform, go to the following one.
Plug the Condor Plume P8 pro into its charger
One thing to do when the display screen of Condor Plume P8 pro remains black is to put the mobile on. This will make it possible to be peaceful for any subsequent manipulations. This also handles the possible problem of a deep discharge of the mobile electric battery.
When possible, take out the electric battery from the Condor Plume P8 pro
If the Condor Plume P8 pro is easily removable, we recommend you to remove the electric battery . This from time to time handles the black display screen problem. Wait a couple of secs, then turn the battery back on and try to start the mobile. In cases where the display screen is still blocked, go to the following step.
Remove SIM card and SD card
It from time to time happens, without justification, that the SIM card or the SD card conflicts with Condor Plume P8 pro and causes a black display screen. One of the tips to try is to take out the SIM card and the SD card. Once it’s finished, you must try to start the mobile phone. In cases where it works, this means there is a conflict with the SIM or SD card.
Force Condor Plume P8 pro to reboot
If the display screen stays black, the problem often resolves with a forced reboot . To accomplish this, you must press a number of keys simultaneously. You need to stay at least 10 secs for the forced reboot to run. The key combination depends on the versions but had to be 1 of the subsequent:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Hang on until the electric battery is empty
Finally, in the event that none of the previously mentioned méthodes perform, you can actually try to let your electric battery discharge. Make certain the electric battery is entirely empty. Once it’s performed, plug your Condor Plume P8 pro into its power adaptor and try to start the Condor Plume P8 pro.
