How to fix Condor Griffe T3 black screen

Sometimes the screen of Condor Griffe T3 stays black. This situation can appear in several circumstances. Sometimes it happens after the Condor Griffe T3 falls. Other times, the screen stays black after a start, lock, or sleep. No matter the reason, don’t be anxious, you will find several methods to resolve the black screen of your Condor Griffe T3. For that, it’s going to be needed to check several things before trying the different solutions. We will find out at primary what things to examine when the screen of Condor Griffe T3 remains black. We will find out in a second time all the tricks to be able to unlock this unpleasant black screen.black-screen-condor-griffe-t3

What should you check out if you have a black screen on Condor Griffe T3

Before embarking on the tricks, we suggest you to check the points below in order to better understand where the problem can originate. This will provide you good clues of the nature of the problem.

Is the Condor Griffe T3 LED on when the screen remains black?

One of the first things to check is the little led that is at the top of your screen. In the event that the LED is red or blue when the Condor Griffe T3 screen remains black, it signifies that the mobile is switched on. In this instance, it is extremely likely that the problem comes from the screen.

Is the Condor Griffe T3 charged?

From time to time, a deep battery discharge prevents the Condor Griffe T3 from turning on for a while. Ensure that the Condor Griffe T3 is completely charged by leaving it connected for at least 1 hour. If perhaps after this the LED does not illuminate and the screen stays black, the problem can probably come from the electric battery.

Is the Condor Griffe T3 damaged?

If the Condor Griffe T3 screen remains black after shock, after dropping , after being wet , or after damage , the screen may perhaps be broken. In this instance, not one of the tips listed below will do the job. You will then have to bring your Condor Griffe T3 to a repairman.

How to proceed when the Condor Griffe T3 screen stays black?

After looking at that the problem comes from the screen, you can try the following ideas to unlock the black screen of your Condor Griffe T3. If a method does not do the job, go to the next one.

Plug the Condor Griffe T3 into its charger

The 1st thing to accomplish when the screen of Condor Griffe T3 remains black is to put the mobile phone on. This makes it feasible to be peaceful for any subsequent manipulations. This additionally resolves the possible problem of a deep discharge of the mobile phone electric battery.

If you can, take away the electric battery from the Condor Griffe T3

If the Condor Griffe T3 is easily detachable, we suggest you to remove the electric battery . This from time to time solves the black screen problem. Wait a couple of seconds, then turn the battery back on and try to start the mobile phone. If perhaps the screen is still blocked, go to the next step.

Remove SIM card and SD card

It from time to time occurs, without justification, that the SIM card or the SD card conflicts with Condor Griffe T3 and triggers a black screen. 1 of the tips to try is to take away the SIM card and the SD card. Once it’s finished, you ought to try to start the phone. If perhaps it works, this means there is a conflict with the SIM or SD card.

Force Condor Griffe T3 to restart

If the screen stays black, the problem often solves with a forced restart . To get this done, you have got to press several keys simultaneously. You will need to remain at least TEN seconds for the forced restart to run. The key combination will depend on the models but had to be 1 of the subsequent:

  • low volume + power button
  • low volume + power button + cough Home
  • high volume + power button
  • volume top + touch power + cough Home
  • touch power + cough Home

Hang on until the electric battery is empty

Finally, if none of the above procédures do the job, you can try to let your electric battery discharge. Be sure the electric battery is totally empty. Once it is done, plug your Condor Griffe T3 into its charger and try to start the Condor Griffe T3.