Sometimes the screen of Archos Diamond S stays black. This situation can appear in many circumstances. Often it occurs after the Archos Diamond S falls. Other times, the screen stays black after a start, lock, or sleep. No matter the reason, don’t worry, you will find several methods to resolve the black screen of your Archos Diamond S. For that, it’s going to be essential to check several stuff just before trying the diverse solutions. We will see at first what things to verify when the screen of Archos Diamond S remains black. We will see in a second time all the tricks in order to unlock this bad black screen.
What should you check out if you have a black screen on Archos Diamond S
Before embarking on the techniques, we suggest you to check the things below in order to better understand where the trouble can originate. This will give you good clues of the nature of the trouble.
Is the Archos Diamond S LED on when the screen remains black?
One of the 1st stuff to check is the tiny led that is on the top of your screen. In the event that the LED is red or blue when the Archos Diamond S screen remains black, this means that the telephone is started. In such a case, it is extremely probably that the trouble comes from the screen.
Is the Archos Diamond S charged?
Sometimes, a deep battery discharge prevents the Archos Diamond S from turning on for quite a while. Ensure the Archos Diamond S is entirely recharged by leaving it connected for at least 1 hour. If after that the LED does not light up and the screen stays black, the trouble can probably result from the battery.
Is the Archos Diamond S damaged?
If the Archos Diamond S screen remains black after shock, after falling , after being wet , or after breaking , the screen may well be broken. In such a case, not one of the tricks listed below will do the job. You will then have to bring your Archos Diamond S to a repairman.
What to do when the Archos Diamond S screen stays black?
After examining that the trouble emanates from the screen, you can actually try the next tips to unlock the black screen of your Archos Diamond S. If a technique does not do the job, look at the next one.
Plug the Archos Diamond S into its charger
One thing to do when the screen of Archos Diamond S remains black is to put the mobile on. This will make it feasible to be peaceful for any following manipulations. This also handles the possible trouble of a deep discharge of the mobile battery.
When possible, take away the battery from the Archos Diamond S
If the Archos Diamond S is easily removable, we suggest you to remove the battery . This from time to time solves the black screen trouble. Hold out a couple of seconds, then turn the battery back on and try to start the mobile. If perhaps the screen is still blocked, look at the next step.
Remove SIM card and SD card
It from time to time happens, without reason, that the SIM card or the SD card conflicts with Archos Diamond S and triggers a black screen. One of the tricks to try is to take away the SIM card and the SD card. When it’s done, it is advisable to try to start the phone. If perhaps it works, it signifies there is a conflict with the SIM or SD card.
Force Archos Diamond S to restart
If the screen stays black, the trouble often solves with a forced restart . To get this done, you will need to press several keys simultaneously. You will need to remain at least TEN seconds for the forced restart to run. The key combination will depend on the models but had to be 1 of the subsequent:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Wait until the battery is empty
At last, in cases where not one of the previously mentioned solutions do the job, you can actually try to let your battery discharge. Make sure the battery is totally empty. When it is done, plug your Archos Diamond S into its power adaptor and try to start the Archos Diamond S.
