Occasionally the display screen of ARCHOS Diamond 2 Plus remains black. This issue may occur in a lot of situations. Oftentimes it occurs after the ARCHOS Diamond 2 Plus falls. Other times, the screen remains black after a start, lock, or sleep. Whatever the case, do not be anxious, you will find several tips to fix the black screen of your ARCHOS Diamond 2 Plus. For that, it’s going to be needed to check several stuff before attempting the different solutions. We will discover at first what things to verify when the screen of ARCHOS Diamond 2 Plus remains black. We will discover in a second time all the tricks to be able to unlock this awful black display screen.
What should you check out when you have a black screen on ARCHOS Diamond 2 Plus
Before embarking on the tricks, we recommend you to check the points below to be able to better understand where the problem can originate. This will provide you good indications of the nature of the problem.
Is the ARCHOS Diamond 2 Plus LED on when the display screen remains black?
One of the first stuff to check is the little led that is on the top of your display screen. In the event that the LED is red or blue when the ARCHOS Diamond 2 Plus display screen remains black, it means that the cellphone is started. In this case, it is very likely that the problem originates from the display screen.
Is the ARCHOS Diamond 2 Plus charged?
Sometimes, a deep battery discharge prevents the ARCHOS Diamond 2 Plus from turning on for quite a while. Ensure that the ARCHOS Diamond 2 Plus is completely recharged by leaving it connected for at least 1 hour. If after this the LED does not light and the display screen remains black, the problem can probably result from the electric battery.
Is the ARCHOS Diamond 2 Plus damaged?
If the ARCHOS Diamond 2 Plus display screen remains black after shock, after dropping , after being wet , or after damage , the screen could possibly be broken. In this case, probably none of the tricks below will work. You will then have to bring your ARCHOS Diamond 2 Plus to a repairman.
How to proceed when the ARCHOS Diamond 2 Plus screen remains black?
After checking that the problem emanates from the display screen, you can actually try the next recommendations to unlock the black display screen of your ARCHOS Diamond 2 Plus. If a trick does not work, go to the following one.
Plug the ARCHOS Diamond 2 Plus into its charger
The 1st thing to perform when the display screen of ARCHOS Diamond 2 Plus remains black is to put the mobile phone on. This makes it feasible to be peaceful for any following manipulations. This also handles the possible problem of a deep discharge of the mobile phone electric battery.
When possible, remove the electric battery from the ARCHOS Diamond 2 Plus
If the ARCHOS Diamond 2 Plus is easily detachable, we recommend you to remove the electric battery . This sometimes handles the black display screen problem. Hang on a couple of seconds, then turn the battery back on and try to start the mobile phone. If perhaps the display screen is still blocked, go to the following step.
Remove SIM card and SD card
It sometimes happens, without justification, that the SIM card or the SD card conflicts with ARCHOS Diamond 2 Plus and triggers a black display screen. One of the tricks to try is to remove the SIM card and the SD card. Once it’s finished, you ought to try to start the mobile phone. If perhaps it works, it signifies there is a conflict with the SIM or SD card.
Force ARCHOS Diamond 2 Plus to reboot
If the display screen remains black, the problem often resolves with a forced reboot . To do this, you need to press several keys simultaneously. You must stay at least TEN seconds for the forced reboot to work. The key combination will depend on the versions but had to be 1 of the subsequent:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Wait until the electric battery is empty
At last, if not one of the previously mentioned procédures work, you can actually try to let your electric battery discharge. Ensure that the electric battery is completely empty. Once it’s performed, plug your ARCHOS Diamond 2 Plus into its phone chrgr and try to start the ARCHOS Diamond 2 Plus.
