Whether in the toilet or in a pool, it from time to time happens that the Zuk is dropped in the water. Even so, it’s not because a phone has fallen in the water that it’s undoubtedly dead. In truth, it is possible to redo an Zuk that has fallen in the water. To achieve this, it is essential to respect particular actions. People often have bad reflexes and this is what can degrade the Zuk. We will first discover the steps to be taken after the Zuk has fallen into the water. We will discover in the secondary place the common errors that many people make.
Steps to follow if your Zuk fell into the water
Whenever you need to recover your Zuk in working order, we highly recommend that you follow the steps listed below.
Don’t try to turn the Zuk back on after exiting the water
The very first thing to do when the Zuk has fallen into the water is to shut off the phone. In truth, if it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Zuk is started and wet, you can create a short circuit and consequently toast the phone.
Remove detachable components
When the Zuk is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will probably be essential to take away the shell, the SIM card, the SD card and the electric battery if possible. When performed, put all of these things to dry and continue to the following step.
Aspire the water that is in your Zuk
Using a straw, you will have to suck up the water that is contained in your Zuk. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Zuk, you will have the ability to start drying it.
Dry the Zuk
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator several hours. Avoid using solutions that cause the phone to heat up or damage the phone. When it is finished, we advise you to leave the Zuk in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Zuk.
Reassemble the components and turn on the Zuk
When you have completed the previous steps, your Zuk should be dry. So now you can make an attempt to turn on the Zuk. In the event that this doesn’t do the job, we advise you to hang on a couple of days or to bring the Zuk to a repairshop.
What should not be done if the Zuk has fallen into the water
There are several stuff not to do when your Zuk has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can kill the Zuk. Next, it is strongly advised not to use a heat source to dry the Zuk. Indeed, methods which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. In fact, it could as well ruin the Zuk.
