How to fix a water damaged on ZUK Z1

Whether in the toilet or in a pool, it sometimes occurs that the ZUK Z1 is slipped into the water. On the other hand, it’s not because a phone has fallen into the water that it’s unavoidably dead. In truth, it is possible to redo an ZUK Z1 that has fallen into the water. To do this, it is needed to respect particular steps. People generally have bad reflexes and this is what can damage the ZUK Z1. We will 1st discover the techniques to be taken after the ZUK Z1 has fallen into the water. We will discover in the 2nd place the classical mistakes that the majority of people make.water-damaged-ZUK-Z1

Methods to follow if your ZUK Z1 fell into the water

If perhaps you wish to restore your ZUK Z1 in operating order, we highly recommend that you follow the steps below.

Do not try to turn the ZUK Z1 back on after exiting the water

The very first thing to perform when the ZUK Z1 has fallen into the water is to shut off the phone. In truth, if it did not switch off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the ZUK Z1 is turned on and wet, you can generate a short circuit and therefore toast the phone.

Remove detachable components

When the ZUK Z1 is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it’ll be needed to take out the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these items to dry and proceed to the next step.

Aspire the water that is in your ZUK Z1

Employing a straw, you must suck up the water that is contained in your ZUK Z1. For doing it, you just have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your ZUK Z1, you will be ready to start drying it.

Dry the ZUK Z1

The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using procédures that cause the phone to heat up or damage the phone. When it is performed, we suggest you to leave the ZUK Z1 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the ZUK Z1.

Reassemble the components and turn on the ZUK Z1

When you have completed the prior steps, your ZUK Z1 should be dry. So now you can try to turn on the ZUK Z1. If this doesn’t do the job, we suggest you to hold out some days or to bring the ZUK Z1 to a repairshop.

What should not be done if the ZUK Z1 has fallen into the water

There are several points not to perform when your ZUK Z1 has fallen into the water. The 1st is to try to turn the phone back on just after. This can kill the ZUK Z1. Following, it is strongly recommended not to use a heat source to dry the ZUK Z1. In fact, solutions which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the phone, do not shake it. Certainly, it could as well damage the ZUK Z1.