Whether in the wc or in a swimming pool, it from time to time happens that the ZTE Nubia My Prague is dropped in the water. However, it’s not because a cellphone has fallen in the water that it’s unavoidably dead. In fact, it is possible to redo an ZTE Nubia My Prague that has fallen in the water. To do this, it is essential to respect specific steps. People frequently have bad reflexes and this is what can damage the ZTE Nubia My Prague. We will 1st discover the techniques to be taken after the ZTE Nubia My Prague has fallen into the water. We will discover in the second place the classical errors that a large number of people make.
Steps to follow in cases where your ZTE Nubia My Prague fell into the water
If you want to restore your ZTE Nubia My Prague in operating order, we advise that you follow the steps below.
Don’t try to turn the ZTE Nubia My Prague back on after getting out the water
The very first thing to accomplish when the ZTE Nubia My Prague has fallen into the water is to turn off the cellphone. In fact, in cases where it did not switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the ZTE Nubia My Prague is turned on and wet, you can create a short circuit and therefore toast the cellphone.
Remove detachable components
When the ZTE Nubia My Prague is out of the water and switched off, it will have to be disassembled to the maximum. This means that it’ll be essential to remove the shell, the SIM card, the SD card and the battery if possible. When done, put all of these things to dry and continue to the following step.
Aspire the water that is in your ZTE Nubia My Prague
Utilizing a straw, you must suck up the water that is contained in your ZTE Nubia My Prague. For doing it, you merely need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your ZTE Nubia My Prague, you will have the capacity to start drying it.
Dry the ZTE Nubia My Prague
The fourth step is to dry the cellphone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using procédures that cause the cellphone to heat up or damage the cellphone. When it is completed, we suggest you to leave the ZTE Nubia My Prague in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the ZTE Nubia My Prague.
Reassemble the components and turn on the ZTE Nubia My Prague
When you have completed the previous steps, your ZTE Nubia My Prague should be dry. So now you can make an attempt to turn on the ZTE Nubia My Prague. If this does not function, we suggest you to hang on a couple of days or to bring the ZTE Nubia My Prague to a repairshop.
What should not be done in cases where the ZTE Nubia My Prague has fallen into the water
You will find several points not to accomplish when your ZTE Nubia My Prague has fallen into the water. The 1st is to make an attempt to turn the cellphone back on just after. This can kill the ZTE Nubia My Prague. Next, it is highly recommended not to use a heat source to dry the ZTE Nubia My Prague. Certainly, solutions which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the cellphone, do not shake it. Certainly, it could likewise damage the ZTE Nubia My Prague.
