Whether in the toilet or in a pool, it from time to time occurs that the ZTE Blade S6 is dropped into the water. Even so, it’s not simply because a mobile phone has fallen into the water that it’s obviously dead. In fact, it is possible to redo an ZTE Blade S6 that has fallen into the water. To get this done, it is important to respect certain steps. People frequently have bad reflexes and this is what can damage the ZTE Blade S6. We will first of all see the steps to be taken after the ZTE Blade S6 has fallen into the water. We will see in the secondary place the classical errors that most people make.
Steps to follow if perhaps your ZTE Blade S6 fell into the water
In the event that you want to restore your ZTE Blade S6 in working order, we recommend that you follow the steps below.
Don’t try to turn the ZTE Blade S6 back on after exiting the water
The very first thing to perform when the ZTE Blade S6 has fallen into the water is to switch off the mobile phone. In fact, if perhaps it did not turn off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the ZTE Blade S6 is switched on and wet, you could generate a short circuit and therefore toast the mobile phone.
Remove detachable components
Once the ZTE Blade S6 is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will be important to take away the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these things to dry and continue to the following step.
Aspire the water that is in your ZTE Blade S6
Using a straw, you must suck up the water that is contained in your ZTE Blade S6. For doing it, you merely need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your ZTE Blade S6, you will have the ability to start drying it.
Dry the ZTE Blade S6
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using procédures that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we recommend you to leave the ZTE Blade S6 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the ZTE Blade S6.
Reassemble the components and turn on the ZTE Blade S6
When you have completed the prior steps, your ZTE Blade S6 should be dry. So now you can make an attempt to turn on the ZTE Blade S6. If perhaps this does not perform, we recommend you to wait some days or to bring the ZTE Blade S6 to a repairshop.
What should not be done if perhaps the ZTE Blade S6 has fallen into the water
You will find several points not to perform when your ZTE Blade S6 has fallen into the water. The first of all is to make an attempt to turn the mobile phone back on just after. This can kill the ZTE Blade S6. Next, it is strongly suggested not to use a heat source to dry the ZTE Blade S6. Indeed, solutions which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile phone, do not shake it. In fact, it could likewise damage the ZTE Blade S6.
