How to fix a water damaged on ZTE Axon

Whether in the wc or in a pool, it occasionally occurs that the ZTE Axon is dropped into the water. On the other hand, it isn’t simply because a telephone has fallen into the water that it’s unavoidably dead. Indeed, it is possible to redo an ZTE Axon that has fallen into the water. To do this, it is required to respect specific actions. People typically have bad reflexes and this is what can deteriorate the ZTE Axon. We will first of all see the methods to be taken after the ZTE Axon has fallen into the water. We will see in the 2nd place the common errors that the majority of people make.water-damaged-ZTE-Axon

Methods to follow if perhaps your ZTE Axon fell into the water

Whenever you desire to restore your ZTE Axon in operating order, we recommend that you follow the steps below.

Don’t attempt to turn the ZTE Axon back on after getting out the water

One thing to do when the ZTE Axon has fallen into the water is to switch off the telephone. Indeed, if perhaps it didn’t switch off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the ZTE Axon is started and wet, you might generate a short circuit and as a result toast the telephone.

Remove detachable components

When the ZTE Axon is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will probably be required to remove the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these items to dry and continue to the following step.

Aspire the water that is in your ZTE Axon

Using a straw, you must suck up the water that is contained in your ZTE Axon. For doing it, you merely need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your ZTE Axon, you will have the ability to start drying it.

Dry the ZTE Axon

The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using methods that cause the telephone to heat up or damage the telephone. When it is performed, we advise you to leave the ZTE Axon in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the ZTE Axon.

Reassemble the components and turn on the ZTE Axon

When you have completed the previous steps, your ZTE Axon should be dry. So now you can make an attempt to turn on the ZTE Axon. If this doesn’t work, we advise you to hold out a few days or to bring the ZTE Axon to a repairman.

What should not be done if perhaps the ZTE Axon has fallen into the water

There are a number of stuff not to do when your ZTE Axon has fallen into the water. The first of all is to make an attempt to turn the telephone back on just after. This can kill the ZTE Axon. Following, it is strongly suggested not to use a heat source to dry the ZTE Axon. In fact, methods which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the telephone, do not shake it. In fact, it could additionally damage the ZTE Axon.